| AUDIO
| FUNCTION_BLOCK
| KEY_MATRIX
| LCD_USB
| MEMORY
| POWER_TREE
| Qi_AVT2
| All sheets
|
| 
|
>>> Adam Wang <adam@qi-hardware.com>
Fri Jan 22 20:12:01 2010 +0800, 9 months ago
1, renamed power-tree J1 to J2. 2, changed C26 from Copper layer to Component layer. 3, changed text of "http://sharism.cc/" to "http://nanonote.cc/" 4, generated *.lst to list every part as bom for confiming automatic insertion (AI) attibute. 5, edited and checked each part's attibutes as Normal+Insert for AI need. 6, generated *-Component.pos & *-Copper.pos for AI. 7, generated *-drc.rpt, gerber files & drill file again
|
|
>>> Carlos Camargo <cicamargoba@gmail.com>
Tue Jan 12 14:13:43 2010 -0500, 9 months ago
Adding CC and COL_LOGO files
|
|
|
|
>>> Adam Wang <adam@qi-hardware.com>
Thu Jan 7 17:49:03 2010 +0800, 9 months ago
1. renamed U12 to KB3436 in function_block 2. added MT48LC32M16A2P-75:C in sch 3. renamed 32MB to 64MB in function_block 4. added "http://sharism.cc/""RXD/TXD/GND""+""-" in Silks_Cmp layer
|
|
>>> Juan Brinez <jgbrinezm@unal.edu.co>
Thu Dec 10 19:20:04 2009 -0500, 10 months ago
Added touch test points (4-pin connector).
|
|
>>> Juan Brinez <jgbrinezm@unal.edu.co>
Wed Dec 9 11:13:48 2009 -0500, 10 months ago
Serial connector: 8P->3P.
|
|
>>> Juan Brinez <jgbrinezm@unal.edu.co>
Mon Nov 30 09:55:39 2009 -0500, 10 months ago
Changes: see the <layout_note_revised2.txt> file.
|
|
|
>>> Juan Brinez <jgbrinezm@unal.edu.co>
Mon Nov 30 09:28:06 2009 -0500, 10 months ago
See the <layout_note_revised2.txt> file.
|
|
|
>>> Juan Brinez <jgbrinezm@unal.edu.co>
Thu Oct 29 14:41:24 2009 -0500, 11 months ago
kb3436 for usb host.
|
|
|
>>> Juan Brinez <jgbrinezm@unal.edu.co>
Wed Oct 14 13:29:29 2009 -0500, 12 months ago
Changin: EMI filter, KEYIN8 and RXD Pull-up.
|
|
|
>>> Juan Brinez <jgbrinezm@unal.edu.co>
Fri Oct 9 18:28:14 2009 -0500, 12 months ago
Added: Fill zones (copper pour), USB-DF IC.
|
|
|
>>> Juan Brinez <jgbrinezm@unal.edu.co>
Sun Oct 4 01:28:53 2009 -0500, 1 year ago
Added copper pour, Connect: 581, Unconnect: 80. (86.63%)
|
|
|
|
|
|
>>> Juan Brinez <jgbrinezm@unal.edu.co>
Sat Oct 3 16:43:22 2009 -0500, 1 year ago
Fixing power labels and connections on hierarchical sheets.
|
|
|
>>> Juan Brinez <jgbrinezm@unal.edu.co>
Fri Sep 25 07:35:57 2009 -0500, 1 year ago
Fix ERC errors on sch file: V18, V33, V33SD, VBAT, VBAT0, VDDHP, VRTC, U3, SW1. Fix components: USB_MICRO_AB, Q5, NPN, CON1, U7, U5, D2.
|
|
>>> Carlos Camargo <cicamargoba@gmail.com>
Thu Sep 24 21:50:57 2009 -0500, 1 year ago
Fix some path errors on Qi_AVT2.brd Qi_AVT2.sch CON_BAT.mod CON_MEM.mod
|
|
|
>>> Juan Brinez <jgbrinezm@unal.edu.co>
Tue Sep 22 23:57:24 2009 -0500, 1 year ago
Fixim problems: USB library.
|
|
>>> Juan Brinez <jgbrinezm@unal.edu.co>
Sat Sep 19 13:55:42 2009 -0500, 1 year ago
Edited sdcw2012 (L3 & L5) library, swap pin 1~2~4.
|
|
>>> Juan Brinez <jgbrinezm@unal.edu.co>
Mon Sep 14 22:57:42 2009 -0500, 1 year, 1 month ago
Fixing someting Erc errors, view the Qi_AVT2.erc file.
|
|
>>> carlos <cain@aldebaran.(none)>
Mon Sep 14 22:08:51 2009 -0500, 1 year, 1 month ago
Route SD CARD lines
|
|
|
|
|
|
>>> Carlos Camargo <cicamargoba@gmail.com>
Sun Sep 13 10:11:12 2009 -0500, 1 year, 1 month ago
Edited pcb, removed extra footprints, reorganized silks texts and more.
|
|
>>> juan64bits <juan64bits@Maximus.(none)>
Sun Sep 13 09:55:49 2009 -0500, 1 year, 1 month ago
New library component. Boot Switch and holes.
|
|
|
|
|
|
>>> carlos <cain@aldebaran.(none)>
Sat Sep 12 22:16:53 2009 -0500, 1 year, 1 month ago
Remove unnecessary Test Points, Adding usb switch connections
|
|
>>> carlos <cain@aldebaran.(none)>
Fri Sep 4 21:51:48 2009 -0500, 1 year, 1 month ago
initial import
|
|
>>> Adam Wang <adam@qi-hardware.com>
Tue Sep 1 00:05:41 2009 +0800, 1 year, 1 month ago
2009/08/31 adam 1, <sch> add SW1 to configure boot selection from NAND or USB 2, <sch> change U6 pin definition pin1 = GND, pin2= OUT 3, <bom> delete R9 to be NC 4, <bom> add SW1 ESP40XX
|
|
|
|
>>> Adam Wang <adam@qi-hardware.com>
Thu Aug 13 10:55:09 2009 +0800, 1 year, 2 months ago
1, Updated BOM / Schematic: a) Added D6/MSCD104 for raising efficiency b) Changed C57 to 0.1uF/16V, C49 to 1uF/16V, TP31 to CKE c) Added R46/10k/5%, d) Added TP85 for +5V USB host voltage measurement
|
|
|
|
|
>>> Adam Wang <adam@qi-hardware.com>
Fri Aug 7 22:30:22 2009 +0800, 1 year, 2 months ago
1, Add H/W version control via R48 & R49 to distinguish. 2, Add USB HOST circuits which including a) Micro-AB Receptacle, b) Use a P-Channel MOSFET to switch 5V to external device by ID signel Hi or Low detection c) Add LT3925EDCB to convert battery voltage to USB power need
|
|
|
|
>>> Adam Wang <adam@qi-hardware.com>
Sat Aug 1 13:46:35 2009 +0800, 1 year, 2 months ago
Added serial con and updated bom
|
|
|
>>> Adam Wang <adam@qi-hardware.com>
Sun Jul 26 23:21:39 2009 +0800, 1 year, 2 months ago
This power_tree.sch is the purpose for layout and quick view
|
|
| |
|
>>> Adam Wang <adam@qi-hardware.com>
Sun Jul 26 23:04:55 2009 +0800, 1 year, 2 months ago
Added power_tree.sch to easily realize that structure of power tree which marked reasonable currents go through traces on power labels
|
| |
|
>>> Adam Wang <adam@qi-hardware.com>
Sat Jul 25 00:52:36 2009 +0800, 1 year, 2 months ago
For quick view, a function block schematic <main/function_block.sch> provided this version.
|
|
| |
|
>>> Adam Wang <adam@qi-hardware.com>
Sat Jul 25 00:36:08 2009 +0800, 1 year, 2 months ago
Due to add function_block schematic which roughly describes current system block of this version
|
| |
|
>>> Adam Wang <adam@qi-hardware.com>
Fri Jul 3 18:01:18 2009 +0800, 1 year, 3 months ago
Marked Power Label and Test Points
|
|
|
|
|
|
|
|
>>> Adam Wang <adam@qi-hardware.com>
Fri Jul 3 17:20:21 2009 +0800, 1 year, 3 months ago
initial commit
|