------------------------------------------------------------------- 1. replaced new u7/u19/u20 2. applied fix2b circuit 3. removed u16/u17 ------------------------------------------------------------------- libHPDMC SDRAM initialization runtime (c) Copyright 2010 Sebastien Bourdeauducq, released under GNU LGPL version 3. Version 1.1 Initialization sequence completed. Autocalibration OK, testing memory... All SDRAM initialization completed, boot continuing. VGA: framebuffers at 0x440215c0 0x441a15c0 0x443215c0 VGA: DDC I2C bus initialized VGA: mode set to 640x480 MILKYMIST(tm) v1.1 BIOS http://www.milkymist.org (c) Copyright 2007, 2008, 2009, 2010, 2011 Sebastien Bourdeauducq This program is free software: you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation, version 3 of the License. I: BIOS CRC passed (93a2e549) BRD: SoC 1.1 on Milkymist One (PCB revision 2) BRD: Mem. card : Yes BRD: AC'97 : Yes BRD: PFPU : Yes BRD: TMU : Yes BRD: Ethernet : Yes BRD: FML meter : Yes BRD: Video in : Yes BRD: MIDI : Yes BRD: DMX : Yes BRD: IR : Yes BRD: USB : Yes BRD: Memtester : No TMU: texture mapping unit initialized USB: loading Navre firmware USB: starting host controller USB: HC: softusb-input v1.1 UKB: USB keyboard connected to console I: Displaying splash screen...OK I: MAC address: 10:e2:d5:00:00:74 I: Press Q or ESC to abort boot I: Aborted boot on user request BIOS> serialboot I: Attempting serial firmware loading sL5DdSMmkekro *** Milkymist One automated tests starting... *** Built: Dec 23 2011 at 18:00:00 (rev 2e778b4) *** Select a test category below, or hit ENTER to run all tests: a: Images b: SDRAM c: GPIO d: VGA e: Memory card f: Audio g: Ethernet h: Video input i: MIDI j: DMX512 k: Infrared l: USB *** a pressed Images CRC: soc-rescue.fpg CRC passed (got 67645429) bios-rescue.bin CRC passed (got 1744bedf) splash-rescue.raw CRC passed (got e8ff824f) flickernoise.fbi CRC passed (got 36fcc9db) soc.fpg CRC passed (got fac2ad92) bios.bin CRC passed (got 93a2e549) splash.raw CRC passed (got 978f860c) flickernoise.fbi CRC passed (got 36fcc9db) [  PASSED  ] *** Select a test category below, or hit ENTER to run all tests: a: Images b: SDRAM c: GPIO d: VGA e: Memory card f: Audio g: Ethernet h: Video input i: MIDI j: DMX512 k: Infrared l: USB *** b pressed A8: [  PASSED  ] A9: [  PASSED  ] A10: [  PASSED  ] A11: [  PASSED  ] A12: [  PASSED  ] Random pattern: [  PASSED  ] Hammer pattern: [  PASSED  ] Crosstalk pattern: [  PASSED  ] *** Select a test category below, or hit ENTER to run all tests: a: Images b: SDRAM c: GPIO d: VGA e: Memory card f: Audio g: Ethernet h: Video input i: MIDI j: DMX512 k: Infrared l: USB *** c pressed SW1: Press the button. f to fail test, s to skip. [  PASSED  ] SW2: Press the button. f to fail test, s to skip. [  PASSED  ] SW3: Press the button. f to fail test, s to skip. [  PASSED  ] LED2: Is the LED on? (y/n/s) [  PASSED  ] LED3: Is the LED on? (y/n/s) [  PASSED  ] *** Select a test category below, or hit ENTER to run all tests: a: Images b: SDRAM c: GPIO d: VGA e: Memory card f: Audio g: Ethernet h: Video input i: MIDI j: DMX512 k: Infrared l: USB *** d pressed DDC: [  PASSED  ] Test card: Is the picture OK? (y/n/s) [  PASSED  ] *** Select a test category below, or hit ENTER to run all tests: a: Images b: SDRAM c: GPIO d: VGA e: Memory card f: Audio g: Ethernet h: Video input i: MIDI j: DMX512 k: Infrared l: USB *** e pressed Card initialization: [  PASSED  ] Block read: [  PASSED  ] *** Select a test category below, or hit ENTER to run all tests: a: Images b: SDRAM c: GPIO d: VGA e: Memory card f: Audio g: Ethernet h: Video input i: MIDI j: DMX512 k: Infrared l: USB *** f pressed Codec probe: [  PASSED  ] Line and headphones outputs: Is the test tone OK? (y/n/s/r) [  PASSED  ] Microphone: Recording...Playing... Is the audio played back? (y/n/s/r) [  PASSED  ] Line input: Recording...Playing... Is the audio played back? (y/n/s/r) [  PASSED  ] *** Select a test category below, or hit ENTER to run all tests: a: Images b: SDRAM c: GPIO d: VGA e: Memory card f: Audio g: Ethernet h: Video input i: MIDI j: DMX512 k: Infrared l: USB *** g pressed MDIO: Unexpected PHY ID: 0045 [  FAILED  ] ARP resolution: [  PASSED  ] *** Select a test category below, or hit ENTER to run all tests: a: Images b: SDRAM c: GPIO d: VGA e: Memory card f: Audio g: Ethernet h: Video input i: MIDI j: DMX512 k: Infrared l: USB *** h pressed Decoder probe: VIN: I2C bus initialized [  PASSED  ] Capture: Press a key to start capturing Waiting for a captured frame. f to fail test, s to skip. LOCKS: 7 AD_RESULT: 4 Is the picture OK? (y/n) [  PASSED  ] *** Select a test category below, or hit ENTER to run all tests: a: Images b: SDRAM c: GPIO d: VGA e: Memory card f: Audio g: Ethernet h: Video input i: MIDI j: DMX512 k: Infrared l: USB *** j pressed DMX512 Loopback: [  PASSED  ] *** Select a test category below, or hit ENTER to run all tests: a: Images b: SDRAM c: GPIO d: VGA e: Memory card f: Audio g: Ethernet h: Video input i: MIDI j: DMX512 k: Infrared l: USB *** k pressed RC5 reception: Press the remote's [1] [3] [5], one by one Waiting for remote. e for exit should be [0x01], get [0x01], [0x11c1]. [1] passed should be [0x03], get [0x01], [0x11c1]. should be [0x03], get [0x01], [0x11c1]. should be [0x03], get [0x03], [0x19c3]. [3] passed should be [0x05], get [0x03], [0x19c3]. should be [0x05], get [0x05], [0x11c5]. [5] passed Now press 'e' exit infrared test. rx [0x11c5] Now press 'e' exit infrared test. rx [0x11c5] [  PASSED  ] *** Select a test category below, or hit ENTER to run all tests: a: Images b: SDRAM c: GPIO d: VGA e: Memory card f: Audio g: Ethernet h: Video input i: MIDI j: DMX512 k: Infrared l: USB ------------------------------------------------------------------- 1. about the err of "Unexpected PHY ID: 0045", please see https://github.com/milkymist/bugs/issues/9 2. replaced new u16/u17. ------------------------------------------------------------------- libHPDMC SDRAM initialization runtime (c) Copyright 2010 Sebastien Bourdeauducq, released under GNU LGPL version 3. Version 1.1 Initialization sequence completed. Autocalibration OK, testing memory... All SDRAM initialization completed, boot continuing. VGA: framebuffers at 0x440215c0 0x441a15c0 0x443215c0 VGA: DDC I2C bus initialized VGA: mode set to 640x480 MILKYMIST(tm) v1.1 BIOS http://www.milkymist.org (c) Copyright 2007, 2008, 2009, 2010, 2011 Sebastien Bourdeauducq This program is free software: you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation, version 3 of the License. I: BIOS CRC passed (93a2e549) BRD: SoC 1.1 on Milkymist One (PCB revision 2) BRD: Mem. card : Yes BRD: AC'97 : Yes BRD: PFPU : Yes BRD: TMU : Yes BRD: Ethernet : Yes BRD: FML meter : Yes BRD: Video in : Yes BRD: MIDI : Yes BRD: DMX : Yes BRD: IR : Yes BRD: USB : Yes BRD: Memtester : No TMU: texture mapping unit initialized USB: loading Navre firmware USB: starting host controller USB: HC: softusb-input v1.1 UKB: USB keyboard connected to console I: Displaying splash screen...USB: HC: Low speed device on port A USB: HC: Low speed device on port B OK USB: HC: VID: 093A, PID: 2510 USB: HC: VID: 0E6A, PID: 6001 USB: HC: Found mouse USB: HC: Found keyboard I: MAC address: 10:e2:d5:00:00:74 I: Press Q or ESC to abort boot I: Aborted boot on user request BIOS> serialboot I: Attempting serial firmware loading sL5DdSMmkekro *** Milkymist One automated tests starting... *** Built: Dec 23 2011 at 18:00:00 (rev 2e778b4) *** Select a test category below, or hit ENTER to run all tests: a: Images b: SDRAM c: GPIO d: VGA e: Memory card f: Audio g: Ethernet h: Video input i: MIDI j: DMX512 k: Infrared l: USB *** a pressed Images CRC: soc-rescue.fpg CRC passed (got 67645429) bios-rescue.bin CRC passed (got 1744bedf) splash-rescue.raw CRC passed (got e8ff824f) flickernoise.fbi CRC passed (got 36fcc9db) soc.fpg CRC passed (got fac2ad92) bios.bin CRC passed (got 93a2e549) splash.raw CRC passed (got 978f860c) flickernoise.fbi CRC passed (got 36fcc9db) [  PASSED  ] *** Select a test category below, or hit ENTER to run all tests: a: Images b: SDRAM c: GPIO d: VGA e: Memory card f: Audio g: Ethernet h: Video input i: MIDI j: DMX512 k: Infrared l: USB *** l pressed USB Port A: USB: loading Navre firmware USB: starting host controller USB: HC: softusb-input v1.1 Press ENTER at the USB keyboard or press the left mouse button... USB: HC: Low speed device on port A USB: HC: Low speed device on port B USB: HC: VID: 093A, PID: 2510 USB: HC: VID: 0E6A, PID: 6001 USB: HC: Found mouse USB: HC: Found keyboard [  PASSED  ] USB Port B: Press ENTER at the USB keyboard or press the left mouse button... [  PASSED  ] *** Select a test category below, or hit ENTER to run all tests: a: Images b: SDRAM c: GPIO d: VGA e: Memory card f: Audio g: Ethernet h: Video input i: MIDI j: DMX512 k: Infrared l: USB *** l pressed USB Port A: Press ENTER at the USB keyboard or press the left mouse button... [  PASSED  ] USB Port B: Press ENTER at the USB keyboard or press the left mouse button... [  PASSED  ] *** Select a test category below, or hit ENTER to run all tests: a: Images b: SDRAM c: GPIO d: VGA e: Memory card f: Audio g: Ethernet h: Video input i: MIDI j: DMX512 k: Infrared l: USB USB: HC: Device disconnect on port A USB: HC: Device disconnect on port B USB: HC: Low speed device on port A USB: HC: VID: 0E6A, PID: 6001 USB: HC: Found keyboard USB: HC: Low speed device on port B USB: HC: Device disconnect on port B USB: HC: Low speed device on port B USB: HC: VID: 093A, PID: 2510 USB: HC: Found mouse *** l pressed USB Port A: Press ENTER at the USB keyboard or press the left mouse button... [  PASSED  ] USB Port B: Press ENTER at the USB keyboard or press the left mouse button... [  PASSED  ] *** Select a test category below, or hit ENTER to run all tests: a: Images b: SDRAM c: GPIO d: VGA e: Memory card f: Audio g: Ethernet h: Video input i: MIDI j: DMX512 k: Infrared l: USB *** l pressed USB Port A: Press ENTER at the USB keyboard or press the left mouse button... [  PASSED  ] USB Port B: Press ENTER at the USB keyboard or press the left mouse button... [  PASSED  ] *** Select a test category below, or hit ENTER to run all tests: a: Images b: SDRAM c: GPIO d: VGA e: Memory card f: Audio g: Ethernet h: Video input i: MIDI j: DMX512 k: Infrared l: USB ------------------------------------------------------------------- 1. rendering and CRC test ------------------------------------------------------------------- libHPDMC SDRAM initialization runtime (c) Copyright 2010 Sebastien Bourdeauducq, released under GNU LGPL version 3. Version 1.1 Initialization sequence completed. Autocalibration OK, testing memory... All SDRAM initialization completed, boot continuing. VGA: framebuffers at 0x440215c0 0x441a15c0 0x443215c0 VGA: DDC I2C bus initialized VGA: mode set to 640x480 MILKYMIST(tm) v1.1 BIOS http://www.milkymist.org (c) Copyright 2007, 2008, 2009, 2010, 2011 Sebastien Bourdeauducq This program is free software: you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation, version 3 of the License. I: BIOS CRC passed (93a2e549) BRD: SoC 1.1 on Milkymist One (PCB revision 2) BRD: Mem. card : Yes BRD: AC'97 : Yes BRD: PFPU : Yes BRD: TMU : Yes BRD: Ethernet : Yes BRD: FML meter : Yes BRD: Video in : Yes BRD: MIDI : Yes BRD: DMX : Yes BRD: IR : Yes BRD: USB : Yes BRD: Memtester : No TMU: texture mapping unit initialized USB: loading Navre firmware USB: starting host controller USB: HC: softusb-input v1.1 UKB: USB keyboard connected to console I: Displaying splash screen...USB: HC: Low speed device on port A USB: HC: Low speed device on port B OK USB: HC: VID: 0E6A, PID: 6001 USB: HC: VID: 093A, PID: 2510 USB: HC: Found keyboard USB: HC: Found mouse I: MAC address: 10:e2:d5:00:00:74 I: Press Q or ESC to abort boot I: Booting from filesystem... E: Unable to initialize memory card driver E: Unable to initialize filesystem I: Booting from flash... I: Loading 2033436 bytes from flash... I: Booting... RTEMS SHELL (Ver.1.0-FRC):/dev/console. Nov 13 2011. 'help' to list commands. [/] # memcard_disk_init: Error: SC = 27: Initialize memory card memcard_register: Error: SC = 27: Register disk memory card driver s# syslog: ftpd: FTP daemon startedD e(v3i csee:s s/idoenvs/ pmtayx0). . /dev/pty4 (5)pseudo-terminals registered. tted (3 sessions max) telnetd started with stacksize = 81920 and priority = 9 BOOTP timeout for server 255.255.255.255 BOOTP call failed -- Connection timed out BOOTP timeout for server 255.255.255.255 BOOTP call failed -- Connection timed out BOOTP timeout for server 255.255.255.255 BOOTP call failed -- Connection timed out BOOTP timeout for server 255.255.255.255 BOOTP call failed -- Connection timed out III libHPDMC SDRAM initialization runtime (c) Copyright 2010 Sebastien Bourdeauducq, released under GNU LGPL version 3. Version 1.1 Initialization sequence completed. Autocalibration OK, testing memory... All SDRAM initialization completed, boot continuing. VGA: framebuffers at 0x440215c0 0x441a15c0 0x443215c0 VGA: DDC I2C bus initialized VGA: mode set to 640x480 MILKYMIST(tm) v1.1 BIOS http://www.milkymist.org (c) Copyright 2007, 2008, 2009, 2010, 2011 Sebastien Bourdeauducq This program is free software: you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation, version 3 of the License. I: BIOS CRC passed (93a2e549) BRD: SoC 1.1 on Milkymist One (PCB revision 2) BRD: Mem. card : Yes BRD: AC'97 : Yes BRD: PFPU : Yes BRD: TMU : Yes BRD: Ethernet : Yes BRD: FML meter : Yes BRD: Video in : Yes BRD: MIDI : Yes BRD: DMX : Yes BRD: IR : Yes BRD: USB : Yes BRD: Memtester : No TMU: texture mapping unit initialized USB: loading Navre firmware USB: starting host controller USB: HC: softusb-input v1.1 UKB: USB keyboard connected to console I: Displaying splash screen...USB: HC: Low speed device on port A USB: HC: Low speed device on port B OK USB: HC: VID: 0E6A, PID: 6001 USB: HC: VID: 093A, PID: 2510 USB: HC: Found keyboard USB: HC: Found mouse I: MAC address: 10:e2:d5:00:00:74 I: Press Q or ESC to abort boot I: Booting from filesystem... E: Unable to initialize memory card driver E: Unable to initialize filesystem I: Booting from flash... I: Loading 2033436 bytes from flash... I: Booting... RTEMS SHELL (Ver.1.0-FRC):/dev/console. Nov 13 2011. 'help' to list commands. [/] # memcard_disk_init: Error: SC = 27: Initialize memory card memcard_register: Error: SC = 27: Register disk memory card driver s# syslog: ftpd: FTP daemon startedD e(v3i csee:s s/idoenvs/ pmtayx0). . /dev/pty4 (5)pseudo-terminals registered. tted (3 sessions max) telnetd started with stacksize = 81920 and priority = 9 BOOTP timeout for server 255.255.255.255 BOOTP call failed -- Connection timed out BOOTP timeout for server 255.255.255.255 BOOTP call failed -- Connection timed out BOOTP timeout for server 255.255.255.255 BOOTP call failed -- Connection timed out BOOTP timeout for server 255.255.255.255 BOOTP call failed -- Connection timed out BOOTP timeout for server 255.255.255.255 BOOTP call failed -- Connection timed out BOOTP timeout for server 255.255.255.255 BOOTP call failed -- Connection timed out II libHPDMC SDRAM initialization runtime (c) Copyright 2010 Sebastien Bourdeauducq, released under GNU LGPL version 3. Version 1.1 Initialization sequence completed. Autocalibration OK, testing memory... All SDRAM initialization completed, boot continuing. VGA: framebuffers at 0x440215c0 0x441a15c0 0x443215c0 VGA: DDC I2C bus initialized VGA: mode set to 640x480 MILKYMIST(tm) v1.1 BIOS http://www.milkymist.org (c) Copyright 2007, 2008, 2009, 2010, 2011 Sebastien Bourdeauducq This program is free software: you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation, version 3 of the License. I: BIOS CRC passed (93a2e549) BRD: SoC 1.1 on Milkymist One (PCB revision 2) BRD: Mem. card : Yes BRD: AC'97 : Yes BRD: PFPU : Yes BRD: TMU : Yes BRD: Ethernet : Yes BRD: FML meter : Yes BRD: Video in : Yes BRD: MIDI : Yes BRD: DMX : Yes BRD: IR : Yes BRD: USB : Yes BRD: Memtester : No TMU: texture mapping unit initialized USB: loading Navre firmware USB: starting host controller USB: HC: softusb-input v1.1 UKB: USB keyboard connected to console I: Displaying splash screen...USB: HC: Low speed device on port A USB: HC: Low speed device on port B OK USB: HC: VID: 0E6A, PID: 6001 USB: HC: VID: 093A, PID: 2510 USB: HC: Found keyboard USB: HC: Found mouse I: MAC address: 10:e2:d5:00:00:74 I: Press Q or ESC to abort boot I: Booting from filesystem... E: Unable to initialize memory card driver E: Unable to initialize filesystem I: Booting from flash... I: Loading 2033436 bytes from flash... I: Booting... RTEMS SHELL (Ver.1.0-FRC):/dev/console. Nov 13 2011. 'help' to list commands. [/] # memcard_disk_init: Error: SC = 27: Initialize memory card memcard_register: Error: SC = 27: Register disk memory card driver s# syslog: ftpd: FTP daemon startedD e(v3i csee:s s/idoenvs/ pmtayx0). . /dev/pty4 (5)pseudo-terminals registered. tted (3 sessions max) telnetd started with stacksize = 81920 and priority = 9 BOOTP timeout for server 255.255.255.255 BOOTP call failed -- Connection timed out BOOTP timeout for server 255.255.255.255 BOOTP call failed -- Connection timed out BOOTP timeout for server 255.255.255.255 BOOTP call failed -- Connection timed out III  libHPDMC SDRAM initialization runtime (c) Copyright 2010 Sebastien Bourdeauducq, released under GNU LGPL version 3. Version 1.1 Initialization sequence completed. Autocalibration OK, testing memory... All SDRAM initialization completed, boot continuing. VGA: framebuffers at 0x440215c0 0x441a15c0 0x443215c0 VGA: DDC I2C bus initialized VGA: mode set to 640x480 MILKYMIST(tm) v1.1 BIOS http://www.milkymist.org (c) Copyright 2007, 2008, 2009, 2010, 2011 Sebastien Bourdeauducq This program is free software: you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation, version 3 of the License. I: BIOS CRC passed (93a2e549) BRD: SoC 1.1 on Milkymist One (PCB revision 2) BRD: Mem. card : Yes BRD: AC'97 : Yes BRD: PFPU : Yes BRD: TMU : Yes BRD: Ethernet : Yes BRD: FML meter : Yes BRD: Video in : Yes BRD: MIDI : Yes BRD: DMX : Yes BRD: IR : Yes BRD: USB : Yes BRD: Memtester : No TMU: texture mapping unit initialized USB: loading Navre firmware USB: starting host controller USB: HC: softusb-input v1.1 UKB: USB keyboard connected to console I: Displaying splash screen...USB: HC: Low speed device on port A USB: HC: Low speed device on port B OK USB: HC: VID: 0E6A, PID: 6001 USB: HC: VID: 093A, PID: 2510 USB: HC: Found keyboard USB: HC: Found mouse I: MAC address: 10:e2:d5:00:00:74 I: Press Q or ESC to abort boot I: Booting from filesystem... E: Unable to initialize memory card driver E: Unable to initialize filesystem I: Booting from flash... I: Loading 2033436 bytes from flash... I: Booting... RTEMS SHELL (Ver.1.0-FRC):/dev/console. Nov 13 2011. 'help' to list commands. [/] # memcard_disk_init: Error: SC = 27: Initialize memory card memcard_register: Error: SC = 27: Register disk memory card driver s# syslog: ftpd: FTP daemon startedD e(v3i csee:s s/idoenvs/ pmtayx0). . /dev/pty4 (5)pseudo-terminals registered. tted (3 sessions max) telnetd started with stacksize = 81920 and priority = 9 BOOTP timeout for server 255.255.255.255 BOOTP call failed -- Connection timed out BOOTP timeout for server 255.255.255.255 BOOTP call failed -- Connection timed out BOOTP timeout for server 255.255.255.255 BOOTP call failed -- Connection timed out IIIIIH libHPDMC SDRAM initialization runtime (c) Copyright 2010 Sebastien Bourdeauducq, released under GNU LGPL version 3. Version 1.1 Initialization sequence completed. Autocalibration OK, testing memory... All SDRAM initialization completed, boot continuing. VGA: framebuffers at 0x440215c0 0x441a15c0 0x443215c0 VGA: DDC I2C bus initialized VGA: mode set to 640x480 MILKYMIST(tm) v1.1 BIOS http://www.milkymist.org (c) Copyright 2007, 2008, 2009, 2010, 2011 Sebastien Bourdeauducq This program is free software: you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation, version 3 of the License. I: BIOS CRC passed (93a2e549) BRD: SoC 1.1 on Milkymist One (PCB revision 2) BRD: Mem. card : Yes BRD: AC'97 : Yes BRD: PFPU : Yes BRD: TMU : Yes BRD: Ethernet : Yes BRD: FML meter : Yes BRD: Video in : Yes BRD: MIDI : Yes BRD: DMX : Yes BRD: IR : Yes BRD: USB : Yes BRD: Memtester : No TMU: texture mapping unit initialized USB: loading Navre firmware USB: starting host controller USB: HC: softusb-input v1.1 UKB: USB keyboard connected to console I: Displaying splash screen...USB: HC: Low speed device on port A USB: HC: Low speed device on port B OK USB: HC: VID: 0E6A, PID: 6001 USB: HC: VID: 093A, PID: 2510 USB: HC: Found keyboard USB: HC: Found mouse I: MAC address: 10:e2:d5:00:00:74 I: Press Q or ESC to abort boot I: Booting from filesystem... E: Unable to initialize memory card driver E: Unable to initialize filesystem I: Booting from flash... I: Loading 2033436 bytes from flash... I: Booting... RTEMS SHELL (Ver.1.0-FRC):/dev/console. Nov 13 2011. 'help' to list commands. [/] # memcard_disk_init: Error: SC = 27: Initialize memory card memcard_register: Error: SC = 27: Register disk memory card driver s# syslog: ftpd: FTP daemon startedD e(v3i csee:s s/idoenvs/ pmtayx0). . /dev/pty4 (5)pseudo-terminals registered. tted (3 sessions max) telnetd started with stacksize = 81920 and priority = 9 BOOTP timeout for server 255.255.255.255 BOOTP call failed -- Connection timed out BOOTP timeout for server 255.255.255.255 BOOTP call failed -- Connection timed out BOOTP timeout for server 255.255.255.255 BOOTP call failed -- Connection timed out IIIIII  libHPDMC SDRAM initialization runtime (c) Copyright 2010 Sebastien Bourdeauducq, released under GNU LGPL version 3. Version 1.1 Initialization sequence completed. Autocalibration OK, testing memory... All SDRAM initialization completed, boot continuing. VGA: framebuffers at 0x440215c0 0x441a15c0 0x443215c0 VGA: DDC I2C bus initialized VGA: mode set to 640x480 MILKYMIST(tm) v1.1 BIOS http://www.milkymist.org (c) Copyright 2007, 2008, 2009, 2010, 2011 Sebastien Bourdeauducq This program is free software: you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation, version 3 of the License. I: BIOS CRC passed (93a2e549) BRD: SoC 1.1 on Milkymist One (PCB revision 2) BRD: Mem. card : Yes BRD: AC'97 : Yes BRD: PFPU : Yes BRD: TMU : Yes BRD: Ethernet : Yes BRD: FML meter : Yes BRD: Video in : Yes BRD: MIDI : Yes BRD: DMX : Yes BRD: IR : Yes BRD: USB : Yes BRD: Memtester : No TMU: texture mapping unit initialized USB: loading Navre firmware USB: starting host controller USB: HC: softusb-input v1.1 UKB: USB keyboard connected to console I: Displaying splash screen...USB: HC: Low speed device on port A USB: HC: Low speed device on port B OK USB: HC: VID: 0E6A, PID: 6001 USB: HC: VID: 093A, PID: 2510 USB: HC: Found keyboard USB: HC: Found mouse I: MAC address: 10:e2:d5:00:00:74 I: Press Q or ESC to abort boot I: Booting from filesystem... E: Unable to initialize memory card driver E: Unable to initialize filesystem I: Booting from flash... I: Loading 2033436 bytes from flash... I: Booting... RTEMS SHELL (Ver.1.0-FRC):/dev/console. Nov 13 2011. 'help' to list commands. [/] # memcard_disk_init: Error: SC = 27: Initialize memory card memcard_register: Error: SC = 27: Register disk memory card driver s# syslog: ftpd: FTP daemon startedD e(v3i csee:s s/idoenvs/ pmtayx0). . /dev/pty4 (5)pseudo-terminals registered. tted (3 sessions max) telnetd started with stacksize = 81920 and priority = 9 BOOTP timeout for server 255.255.255.255 BOOTP call failed -- Connection timed out BOOTP timeout for server 255.255.255.255 BOOTP call failed -- Connection timed out BOOTP timeout for server 255.255.255.255 BOOTP call failed -- Connection timed out IIII libHPDMC SDRAM initialization runtime (c) Copyright 2010 Sebastien Bourdeauducq, released under GNU LGPL version 3. Version 1.1 Initialization sequence completed. Autocalibration OK, testing memory... All SDRAM initialization completed, boot continuing. VGA: framebuffers at 0x440215c0 0x441a15c0 0x443215c0 VGA: DDC I2C bus initialized VGA: mode set to 640x480 MILKYMIST(tm) v1.1 BIOS http://www.milkymist.org (c) Copyright 2007, 2008, 2009, 2010, 2011 Sebastien Bourdeauducq This program is free software: you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation, version 3 of the License. I: BIOS CRC passed (93a2e549) BRD: SoC 1.1 on Milkymist One (PCB revision 2) BRD: Mem. card : Yes BRD: AC'97 : Yes BRD: PFPU : Yes BRD: TMU : Yes BRD: Ethernet : Yes BRD: FML meter : Yes BRD: Video in : Yes BRD: MIDI : Yes BRD: DMX : Yes BRD: IR : Yes BRD: USB : Yes BRD: Memtester : No TMU: texture mapping unit initialized USB: loading Navre firmware USB: starting host controller USB: HC: softusb-input v1.1 UKB: USB keyboard connected to console I: Displaying splash screen...USB: HC: Low speed device on port A USB: HC: Low speed device on port B OK USB: HC: VID: 0E6A, PID: 6001 USB: HC: VID: 093A, PID: 2510 USB: HC: Found keyboard USB: HC: Found mouse I: MAC address: 10:e2:d5:00:00:74 I: Press Q or ESC to abort boot I: Booting from filesystem... E: Unable to initialize memory card driver E: Unable to initialize filesystem I: Booting from flash... I: Loading 2033436 bytes from flash... I: Booting... RTEMS SHELL (Ver.1.0-FRC):/dev/console. Nov 13 2011. 'help' to list commands. [/] # memcard_disk_init: Error: SC = 27: Initialize memory card memcard_register: Error: SC = 27: Register disk memory card driver s# syslog: ftpd: FTP daemon startedD e(v3i csee:s s/idoenvs/ pmtayx0). . /dev/pty4 (5)pseudo-terminals registered. tted (3 sessions max) telnetd started with stacksize = 81920 and priority = 9 BOOTP timeout for server 255.255.255.255 BOOTP call failed -- Connection timed out BOOTP timeout for server 255.255.255.255 BOOTP call failed -- Connection timed out BOOTP timeout for server 255.255.255.255 BOOTP call failed -- Connection timed out BOOTP timeout for server 255.255.255.255 BOOTP call failed -- Connection timed out II2""" libHPDMC SDRAM initialization runtime (c) Copyright 2010 Sebastien Bourdeauducq, released under GNU LGPL version 3. Version 1.1 Initialization sequence completed. Autocalibration OK, testing memory... All SDRAM initialization completed, boot continuing. VGA: framebuffers at 0x440215c0 0x441a15c0 0x443215c0 VGA: DDC I2C bus initialized VGA: mode set to 640x480 MILKYMIST(tm) v1.1 BIOS http://www.milkymist.org (c) Copyright 2007, 2008, 2009, 2010, 2011 Sebastien Bourdeauducq This program is free software: you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation, version 3 of the License. I: BIOS CRC passed (93a2e549) BRD: SoC 1.1 on Milkymist One (PCB revision 2) BRD: Mem. card : Yes BRD: AC'97 : Yes BRD: PFPU : Yes BRD: TMU : Yes BRD: Ethernet : Yes BRD: FML meter : Yes BRD: Video in : Yes BRD: MIDI : Yes BRD: DMX : Yes BRD: IR : Yes BRD: USB : Yes BRD: Memtester : No TMU: texture mapping unit initialized USB: loading Navre firmware USB: starting host controller USB: HC: softusb-input v1.1 UKB: USB keyboard connected to console I: Displaying splash screen...USB: HC: Low speed device on port A USB: HC: Low speed device on port B OK USB: HC: VID: 0E6A, PID: 6001 USB: HC: VID: 093A, PID: 2510 USB: HC: Found keyboard USB: HC: Found mouse I: MAC address: 10:e2:d5:00:00:74 I: Press Q or ESC to abort boot I: Booting from filesystem... E: Unable to initialize memory card driver E: Unable to initialize filesystem I: Booting from flash... I: Loading 2033436 bytes from flash... I: Booting... RTEMS SHELL (Ver.1.0-FRC):/dev/console. Nov 13 2011. 'help' to list commands. [/] # memcard_disk_init: Error: SC = 27: Initialize memory card memcard_register: Error: SC = 27: Register disk memory card driver s# syslog: ftpd: FTP daemon startedD e(v3i csee:s s/idoenvs/ pmtayx0). . /dev/pty4 (5)pseudo-terminals registered. tted (3 sessions max) telnetd started with stacksize = 81920 and priority = 9 BOOTP timeout for server 255.255.255.255 BOOTP call failed -- Connection timed out BOOTP timeout for server 255.255.255.255 BOOTP call failed -- Connection timed out BOOTP timeout for server 255.255.255.255 BOOTP call failed -- Connection timed out III libHPDMC SDRAM initialization runtime (c) Copyright 2010 Sebastien Bourdeauducq, released under GNU LGPL version 3. Version 1.1 Initialization sequence completed. Autocalibration OK, testing memory... All SDRAM initialization completed, boot continuing. VGA: framebuffers at 0x440215c0 0x441a15c0 0x443215c0 VGA: DDC I2C bus initialized VGA: mode set to 640x480 MILKYMIST(tm) v1.1 BIOS http://www.milkymist.org (c) Copyright 2007, 2008, 2009, 2010, 2011 Sebastien Bourdeauducq This program is free software: you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation, version 3 of the License. I: BIOS CRC passed (93a2e549) BRD: SoC 1.1 on Milkymist One (PCB revision 2) BRD: Mem. card : Yes BRD: AC'97 : Yes BRD: PFPU : Yes BRD: TMU : Yes BRD: Ethernet : Yes BRD: FML meter : Yes BRD: Video in : Yes BRD: MIDI : Yes BRD: DMX : Yes BRD: IR : Yes BRD: USB : Yes BRD: Memtester : No TMU: texture mapping unit initialized USB: loading Navre firmware USB: starting host controller USB: HC: softusb-input v1.1 UKB: USB keyboard connected to console I: Displaying splash screen...USB: HC: Low speed device on port A USB: HC: Low speed device on port B OK USB: HC: VID: 0E6A, PID: 6001 USB: HC: VID: 093A, PID: 2510 USB: HC: Found keyboard USB: HC: Found mouse I: MAC address: 10:e2:d5:00:00:74 I: Press Q or ESC to abort boot I: Booting from filesystem... E: Unable to initialize memory card driver E: Unable to initialize filesystem I: Booting from flash... I: Loading 2033436 bytes from flash... I: Booting... RTEMS SHELL (Ver.1.0-FRC):/dev/console. Nov 13 2011. 'help' to list commands. [/] # memcard_disk_init: Error: SC = 27: Initialize memory card memcard_register: Error: SC = 27: Register disk memory card driver s# syslog: ftpd: FTP daemon startedD e(v3i csee:s s/idoenvs/ pmtayx0). . /dev/pty4 (5)pseudo-terminals registered. tted (3 sessions max) telnetd started with stacksize = 81920 and priority = 9 BOOTP timeout for server 255.255.255.255 BOOTP call failed -- Connection timed out BOOTP timeout for server 255.255.255.255 BOOTP call failed -- Connection timed out BOOTP timeout for server 255.255.255.255 BOOTP call failed -- Connection timed out BOOTP timeout for server 255.255.255.255 BOOTP call failed -- Connection timed out IIIIH libHPDMC SDRAM initialization runtime (c) Copyright 2010 Sebastien Bourdeauducq, released under GNU LGPL version 3. Version 1.1 Initialization sequence completed. Autocalibration OK, testing memory... All SDRAM initialization completed, boot continuing. VGA: framebuffers at 0x440215c0 0x441a15c0 0x443215c0 VGA: DDC I2C bus initialized VGA: mode set to 640x480 MILKYMIST(tm) v1.1 BIOS http://www.milkymist.org (c) Copyright 2007, 2008, 2009, 2010, 2011 Sebastien Bourdeauducq This program is free software: you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation, version 3 of the License. I: BIOS CRC passed (93a2e549) BRD: SoC 1.1 on Milkymist One (PCB revision 2) BRD: Mem. card : Yes BRD: AC'97 : Yes BRD: PFPU : Yes BRD: TMU : Yes BRD: Ethernet : Yes BRD: FML meter : Yes BRD: Video in : Yes BRD: MIDI : Yes BRD: DMX : Yes BRD: IR : Yes BRD: USB : Yes BRD: Memtester : No TMU: texture mapping unit initialized USB: loading Navre firmware USB: starting host controller USB: HC: softusb-input v1.1 UKB: USB keyboard connected to console I: Displaying splash screen...USB: HC: Low speed device on port A USB: HC: Low speed device on port B OK USB: HC: VID: 0E6A, PID: 6001 USB: HC: VID: 093A, PID: 2510 USB: HC: Found keyboard USB: HC: Found mouse I: MAC address: 10:e2:d5:00:00:74 I: Press Q or ESC to abort boot I: Booting from filesystem... E: Unable to initialize memory card driver E: Unable to initialize filesystem I: Booting from flash... I: Loading 2033436 bytes from flash... I: Booting... RTEMS SHELL (Ver.1.0-FRC):/dev/console. Nov 13 2011. 'help' to list commands. [/] # memcard_disk_init: Error: SC = 27: Initialize memory card memcard_register: Error: SC = 27: Register disk memory card driver s# syslog: ftpd: FTP daemon startedD e(v3i csee:s s/idoenvs/ pmtayx0). . /dev/pty4 (5)pseudo-terminals registered. tted (3 sessions max) telnetd started with stacksize = 81920 and priority = 9 BOOTP timeout for server 255.255.255.255 BOOTP call failed -- Connection timed out BOOTP timeout for server 255.255.255.255 BOOTP call failed -- Connection timed out BOOTP timeout for server 255.255.255.255 BOOTP call failed -- Connection timed out IIIII libHPDMC SDRAM initialization runtime (c) Copyright 2010 Sebastien Bourdeauducq, released under GNU LGPL version 3. Version 1.1 Initialization sequence completed. Autocalibration OK, testing memory... All SDRAM initialization completed, boot continuing. VGA: framebuffers at 0x440215c0 0x441a15c0 0x443215c0 VGA: DDC I2C bus initialized VGA: mode set to 640x480 MILKYMIST(tm) v1.1 BIOS http://www.milkymist.org (c) Copyright 2007, 2008, 2009, 2010, 2011 Sebastien Bourdeauducq This program is free software: you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation, version 3 of the License. I: BIOS CRC passed (93a2e549) BRD: SoC 1.1 on Milkymist One (PCB revision 2) BRD: Mem. card : Yes BRD: AC'97 : Yes BRD: PFPU : Yes BRD: TMU : Yes BRD: Ethernet : Yes BRD: FML meter : Yes BRD: Video in : Yes BRD: MIDI : Yes BRD: DMX : Yes BRD: IR : Yes BRD: USB : Yes BRD: Memtester : No TMU: texture mapping unit initialized USB: loading Navre firmware USB: starting host controller USB: HC: softusb-input v1.1 UKB: USB keyboard connected to console I: Displaying splash screen...USB: HC: Low speed device on port A USB: HC: Low speed device on port B OK USB: HC: VID: 0E6A, PID: 6001 USB: HC: VID: 093A, PID: 2510 USB: HC: Found keyboard USB: HC: Found mouse I: MAC address: 10:e2:d5:00:00:74 I: Press Q or ESC to abort boot I: Booting from filesystem... E: Unable to initialize memory card driver E: Unable to initialize filesystem I: Booting from flash... I: Loading 2033436 bytes from flash... I: Booting... RTEMS SHELL (Ver.1.0-FRC):/dev/console. Nov 13 2011. 'help' to list commands. [/] # memcard_disk_init: Error: SC = 27: Initialize memory card memcard_register: Error: SC = 27: Register disk memory card driver s# syslog: ftpd: FTP daemon startedD e(v3i csee:s s/idoenvs/ pmtayx0). . /dev/pty4 (5)pseudo-terminals registered. tted (3 sessions max) telnetd started with stacksize = 81920 and priority = 9 BOOTP timeout for server 255.255.255.255 BOOTP call failed -- Connection timed out BOOTP timeout for server 255.255.255.255 BOOTP call failed -- Connection timed out BOOTP timeout for server 255.255.255.255 BOOTP call failed -- Connection timed out I""" libHPDMC SDRAM initialization runtime (c) Copyright 2010 Sebastien Bourdeauducq, released under GNU LGPL version 3. Version 1.1 Initialization sequence completed. Autocalibration OK, testing memory... All SDRAM initialization completed, boot continuing. VGA: framebuffers at 0x440215c0 0x441a15c0 0x443215c0 VGA: DDC I2C bus initialized VGA: mode set to 640x480 MILKYMIST(tm) v1.1 BIOS http://www.milkymist.org (c) Copyright 2007, 2008, 2009, 2010, 2011 Sebastien Bourdeauducq This program is free software: you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation, version 3 of the License. I: BIOS CRC passed (93a2e549) BRD: SoC 1.1 on Milkymist One (PCB revision 2) BRD: Mem. card : Yes BRD: AC'97 : Yes BRD: PFPU : Yes BRD: TMU : Yes BRD: Ethernet : Yes BRD: FML meter : Yes BRD: Video in : Yes BRD: MIDI : Yes BRD: DMX : Yes BRD: IR : Yes BRD: USB : Yes BRD: Memtester : No TMU: texture mapping unit initialized USB: loading Navre firmware USB: starting host controller USB: HC: softusb-input v1.1 UKB: USB keyboard connected to console I: Displaying splash screen...USB: HC: Low speed device on port A USB: HC: Low speed device on port B OK USB: HC: VID: 0E6A, PID: 6001 USB: HC: VID: 093A, PID: 2510 USB: HC: Found keyboard USB: HC: Found mouse I: MAC address: 10:e2:d5:00:00:74 I: Press Q or ESC to abort boot I: Aborted boot on user request BIOS> serialboot I: Attempting serial firmware loading sL5DdSMmkekro *** Milkymist One automated tests starting... *** Built: Dec 23 2011 at 18:00:00 (rev 2e778b4) *** Select a test category below, or hit ENTER to run all tests: a: Images b: SDRAM c: GPIO d: VGA e: Memory card f: Audio g: Ethernet h: Video input i: MIDI j: DMX512 k: Infrared l: USB *** a pressed Images CRC: soc-rescue.fpg CRC passed (got 67645429) bios-rescue.bin CRC passed (got 1744bedf) splash-rescue.raw CRC passed (got e8ff824f) flickernoise.fbi CRC passed (got 36fcc9db) soc.fpg CRC passed (got fac2ad92) bios.bin CRC passed (got 93a2e549) splash.raw CRC passed (got 978f860c) flickernoise.fbi CRC passed (got 36fcc9db) [  PASSED  ] *** Select a test category below, or hit ENTER to run all tests: a: Images b: SDRAM c: GPIO d: VGA e: Memory card f: Audio g: Ethernet h: Video input i: MIDI j: DMX512 k: Infrared l: USB