flterm --port /dev/ttyUSB0 --kernel boot.4e53273.bin [FLTERM] Starting... libHPDMC SDRAM initialization runtime (c) Copyright 2010 Sebastien Bourdeauducq, released under GNU LGPL version 3. Version 1.0 Initialization sequence completed. Autocalibration OK, testing memory... All SDRAM initialization completed, boot continuing. VGA: framebuffers at 0x440215c0 0x441a15c0 0x443215c0 VGA: DDC I2C bus initialized VGA: mode set to 640x480 MILKYMIST(tm) v1.0 BIOS http://www.milkymist.org (c) Copyright 2007, 2008, 2009, 2010, 2011 Sebastien Bourdeauducq This program is free software: you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation, version 3 of the License. I: BIOS CRC passed (86e23684) BRD: SoC 1.0 on Milkymist One (PCB revision 2) BRD: Mem. card : Yes BRD: AC'97 : Yes BRD: PFPU : Yes BRD: TMU : Yes BRD: Ethernet : Yes BRD: FML meter : Yes BRD: Video in : Yes BRD: MIDI : Yes BRD: DMX : Yes BRD: IR : Yes BRD: USB : Yes BRD: Memtester : No TMU: texture mapping unit initialized USB: loading Navre firmware USB: starting host controller USB: HC: softusb-input v1.0 UKB: USB keyboard connected to console I: Displaying splash screen...USB: HC: Low speed device on port A USB: HC: Low speed device on port B OK I: MAC address: 10:e2:d5:00:00:5b I: Press Q or ESC to abort boot I: Aborted boot on user request BIOS> USB: HC: VID: 093A, PID: 2510 USB: HC: VID: 0E6A, PID: 6001 USB: HC: Found mouse USB: HC: Found keyboard serialboot I: Attempting serial firmware loading sL5DdSMmkekro [FLTERM] Received firmware download request from the device. [FLTERM] Uploading kernel (61636 bytes)... [FLTERM] Upload complete (9.7KB/s). [FLTERM] Booting the device. [FLTERM] Done. *** Milkymist One automated tests starting... *** Select a test category below, or hit ENTER to run all tests: a: Images b: SDRAM c: GPIO d: VGA e: Memory card f: Audio g: Ethernet h: Video input i: MIDI j: DMX512 k: Infrared l: USB *** i pressed MIDI Loopback: press 'e' exit MIDI test 0 ~ 255 sent out, press 'e' for exit 0 ~ 255 sent out, press 'e' for exit 0 ~ 255 sent out, press 'e' for exit [ PASSED ] *** Select a test category below, or hit ENTER to run all tests: a: Images b: SDRAM c: GPIO d: VGA e: Memory card f: Audio g: Ethernet h: Video input i: MIDI j: DMX512 k: Infrared l: USB *** Running tests in category: Images Images CRC: Checking : standby.fpg CRC passed (got c58e8905) Checking : soc-rescue.fpg CRC passed (got 30dcc535) Checking : bios-rescue.bin(CRC) CRC passed (got efa00d1c) Checking : splash-rescue.raw CRC passed (got e8ff824f) Checking : flickernoise.fbi(rescue)(CRC) CRC passed (got aa12a56a) Checking : soc.fpg CRC passed (got 3a31e737) Checking : bios.bin(CRC) CRC passed (got 86e23684) Checking : splash.raw CRC passed (got 978f860c) Checking : flickernoise.fbi(CRC) CRC passed (got aa12a56a) [ PASSED ] *** Running tests in category: SDRAM A8: [ PASSED ] A9: [ PASSED ] A10: [ PASSED ] A11: [ PASSED ] A12: [ PASSED ] Random pattern: [ PASSED ] Hammer pattern: [ PASSED ] Crosstalk pattern: [ PASSED ] *** Running tests in category: GPIO SW1: Press the button. f to fail test, s to skip. [ PASSED ] SW2: Press the button. f to fail test, s to skip. [ PASSED ] SW3: Press the button. f to fail test, s to skip. [ PASSED ] LED2: Is the LED on? (y/n/s) [ PASSED ] LED3: Is the LED on? (y/n/s) [ PASSED ] *** Running tests in category: VGA DDC: [ PASSED ] Test card: Is the picture OK? (y/n/s) [ FAILED ] *** Running tests in category: Memory card Card initialization: [ PASSED ] Block read: [ PASSED ] *** Running tests in category: Audio Codec probe: [ PASSED ] Line and headphones outputs: Is the test tone OK? (y/n/s/r) [ PASSED ] Microphone: Recording...Playing... Is the audio played back? (y/n/s/r) [ PASSED ] Line input: Recording...Playing... Is the audio played back? (y/n/s/r) [ PASSED ] *** Running tests in category: Ethernet MDIO: [ PASSED ] ARP resolution: [ PASSED ] *** Running tests in category: Video input Decoder probe: VIN: I2C bus initialized [ PASSED ] Capture: Press a key to start capturing Waiting for a captured frame. f to fail test, s to skip. LOCKS: 7 AD_RESULT: 4 Is the picture OK? (y/n) [ FAILED ] *** Running tests in category: MIDI MIDI Loopback: press 'e' exit MIDI test 0 ~ 255 sent out, press 'e' for exit 0 ~ 255 sent out, press 'e' for exit 0 ~ 255 sent out, press 'e' for exit 0 ~ 255 sent out, press 'e' for exit 0 ~ 255 sent out, press 'e' for exit [ PASSED ] *** Running tests in category: DMX512 DMX512 Loopback: [ PASSED ] *** Running tests in category: Infrared RC5 reception: Press the remote's [1] [3] [5], one by one Waiting for remote. e for exit should be [0x01], get [0x01], [0x19c1]. [1] passed should be [0x03], get [0x01], [0x19c1]. should be [0x03], get [0x03], [0x11c3]. [3] passed should be [0x05], get [0x03], [0x11c3]. should be [0x05], get [0x05], [0x19c5]. [5] passed Now press 'e' exit infrared test. rx [0x19c5] [ PASSED ] *** Running tests in category: USB USB Port A: USB: loading Navre firmware USB: starting host controller USB: HC: softusb-input v1.0 Press ENTER at the USB keyboard or press the left mouse button... USB: HC: Low speed device on port A USB: HC: Low speed device on port B USB: HC: VID: 093A, PID: 2510 USB: HC: VID: 0E6A, PID: 6001 USB: HC: Found mouse USB: HC: Found keyboard [ PASSED ] USB Port B: Press ENTER at the USB keyboard or press the left mouse button... [ PASSED ] ******** TEST SUMMARY ******** Failed tests: - VGA/Test card - Video input/Capture Skipped tests: 0 Failed tests: 2 Passed tests: 29 Total tests: 31 ******** SOME TESTS FAILED ******** *** Select a test category below, or hit ENTER to run all tests: a: Images b: SDRAM c: GPIO d: VGA e: Memory card f: Audio g: Ethernet h: Video input i: MIDI j: DMX512 k: Infrared l: USB ------------------------------------------------------------------- replaced new u7/u19/u20 ------------------------------------------------------------------- flterm --port /dev/ttyUSB0 --kernel boot.4e53273.bin [FLTERM] Starting... libHPDMC SDRAM initialization runtime (c) Copyright 2010 Sebastien Bourdeauducq, released under GNU LGPL version 3. Version 1.0 Initialization sequence completed. Autocalibration OK, testing memory... All SDRAM initialization completed, boot continuing. VGA: framebuffers at 0x440215c0 0x441a15c0 0x443215c0 VGA: DDC I2C bus initialized VGA: mode set to 640x480 MILKYMIST(tm) v1.0 BIOS http://www.milkymist.org (c) Copyright 2007, 2008, 2009, 2010, 2011 Sebastien Bourdeauducq This program is free software: you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation, version 3 of the License. I: BIOS CRC passed (86e23684) BRD: SoC 1.0 on Milkymist One (PCB revision 2) BRD: Mem. card : Yes BRD: AC'97 : Yes BRD: PFPU : Yes BRD: TMU : Yes BRD: Ethernet : Yes BRD: FML meter : Yes BRD: Video in : Yes BRD: MIDI : Yes BRD: DMX : Yes BRD: IR : Yes BRD: USB : Yes BRD: Memtester : No TMU: texture mapping unit initialized USB: loading Navre firmware USB: starting host controller USB: HC: softusb-input v1.0 UKB: USB keyboard connected to console I: Displaying splash screen...OK I: MAC address: 10:e2:d5:00:00:5b I: Press Q or ESC to abort boot I: Aborted boot on user request BIOS> serialboot I: Attempting serial firmware loading sL5DdSMmkekro [FLTERM] Received firmware download request from the device. [FLTERM] Uploading kernel (61636 bytes)... [FLTERM] Upload complete (9.7KB/s). [FLTERM] Booting the device. [FLTERM] Done. *** Milkymist One automated tests starting... *** Select a test category below, or hit ENTER to run all tests: a: Images b: SDRAM c: GPIO d: VGA e: Memory card f: Audio g: Ethernet h: Video input i: MIDI j: DMX512 k: Infrared l: USB *** a pressed Images CRC: Checking : standby.fpg CRC passed (got c58e8905) Checking : soc-rescue.fpg CRC passed (got 30dcc535) Checking : bios-rescue.bin(CRC) CRC passed (got efa00d1c) Checking : splash-rescue.raw CRC passed (got e8ff824f) Checking : flickernoise.fbi(rescue)(CRC) CRC passed (got aa12a56a) Checking : soc.fpg CRC passed (got 3a31e737) Checking : bios.bin(CRC) CRC passed (got 86e23684) Checking : splash.raw CRC passed (got 978f860c) Checking : flickernoise.fbi(CRC) CRC passed (got aa12a56a) [ PASSED ] *** Select a test category below, or hit ENTER to run all tests: a: Images b: SDRAM c: GPIO d: VGA e: Memory card f: Audio g: Ethernet h: Video input i: MIDI j: DMX512 k: Infrared l: USB *** d pressed DDC: [ PASSED ] Test card: Is the picture OK? (y/n/s) [ PASSED ] *** Select a test category below, or hit ENTER to run all tests: a: Images b: SDRAM c: GPIO d: VGA e: Memory card f: Audio g: Ethernet h: Video input i: MIDI j: DMX512 k: Infrared l: USB *** h pressed Decoder probe: VIN: I2C bus initialized [ PASSED ] Capture: Press a key to start capturing Waiting for a captured frame. f to fail test, s to skip. LOCKS: 7 AD_RESULT: 4 Is the picture OK? (y/n) [ PASSED ] *** Select a test category below, or hit ENTER to run all tests: a: Images b: SDRAM c: GPIO d: VGA e: Memory card f: Audio g: Ethernet h: Video input i: MIDI j: DMX512 k: Infrared l: USB *** i pressed MIDI Loopback: press 'e' exit MIDI test 0 ~ 255 sent out, press 'e' for exit 0 ~ 255 sent out, press 'e' for exit 0 ~ 255 sent out, press 'e' for exit 0 ~ 255 sent out, press 'e' for exit [ PASSED ] *** Select a test category below, or hit ENTER to run all tests: a: Images b: SDRAM c: GPIO d: VGA e: Memory card f: Audio g: Ethernet h: Video input i: MIDI j: DMX512 k: Infrared l: USB ------------------------------------------------------------------- 1. applied fix2b circuit 2. rendering and CRC test ------------------------------------------------------------------- libHPDMC SDRAM initialization runtime (c) Copyright 2010 Sebastien Bourdeauducq, released under GNU LGPL version 3. Version 1.0 Initialization sequence completed. Autocalibration OK, testing memory... All SDRAM initialization completed, boot continuing. VGA: framebuffers at 0x440215c0 0x441a15c0 0x443215c0 VGA: DDC I2C bus initialized VGA: mode set to 640x480 MILKYMIST(tm) v1.0 BIOS http://www.milkymist.org (c) Copyright 2007, 2008, 2009, 2010, 2011 Sebastien Bourdeauducq This program is free software: you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation, version 3 of the License. I: BIOS CRC passed (86e23684) BRD: SoC 1.0 on Milkymist One (PCB revision 2) BRD: Mem. card : Yes BRD: AC'97 : Yes BRD: PFPU : Yes BRD: TMU : Yes BRD: Ethernet : Yes BRD: FML meter : Yes BRD: Video in : Yes BRD: MIDI : Yes BRD: DMX : Yes BRD: IR : Yes BRD: USB : Yes BRD: Memtester : No TMU: texture mapping unit initialized USB: loading Navre firmware USB: starting host controller USB: HC: softusb-input v1.0 UKB: USB keyboard connected to console I: Displaying splash screen...USB: HC: Low speed device on port A USB: HC: Low speed device on port B OK I: MAC address: 10:e2:d5:00:00:5b I: Press Q or ESC to abort boot USB: HC: VID: 0E6A, PID: 6001 USB: HC: VID: 093A, PID: 2510 USB: HC: Found keyboard USB: HC: Found mouse I: Booting from filesystem... E: Unable to initialize memory card driver E: Unable to initialize filesystem I: Booting from flash... I: Loading 1889692 bytes from flash... I: Booting... RTEMS SHELL (Ver.1.0-FRC):/dev/console. Jun 4 2011. 'help' to list commands. [/] # memcard_disk_init: Error: SC = 27: Initialize memory card memcard_register: Error: SC = 27: Register disk memory card driver BOOTP timeout for server 255.255.255.255 BOOTP call failed -- Connection timed out syslog: ftpd:D eFvTiPc ed:a e/mdoenv /spttayr0t.e.d/ d(e3v /spetsys4i o(n5s) pmsaexu)d o -terminals registered. telnetd started with stacksize = 81920 and priority = 9 wwwff‘ libHPDMC SDRAM initialization runtime (c) Copyright 2010 Sebastien Bourdeauducq, released under GNU LGPL version 3. Version 1.0 Initialization sequence completed. Autocalibration OK, testing memory... All SDRAM initialization completed, boot continuing. VGA: framebuffers at 0x440215c0 0x441a15c0 0x443215c0 VGA: DDC I2C bus initialized VGA: mode set to 640x480 MILKYMIST(tm) v1.0 BIOS http://www.milkymist.org (c) Copyright 2007, 2008, 2009, 2010, 2011 Sebastien Bourdeauducq This program is free software: you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation, version 3 of the License. I: BIOS CRC passed (86e23684) BRD: SoC 1.0 on Milkymist One (PCB revision 2) BRD: Mem. card : Yes BRD: AC'97 : Yes BRD: PFPU : Yes BRD: TMU : Yes BRD: Ethernet : Yes BRD: FML meter : Yes BRD: Video in : Yes BRD: MIDI : Yes BRD: DMX : Yes BRD: IR : Yes BRD: USB : Yes BRD: Memtester : No TMU: texture mapping unit initialized USB: loading Navre firmware USB: starting host controller USB: HC: softusb-input v1.0 UKB: USB keyboard connected to console I: Displaying splash screen...USB: HC: Low speed device on port A USB: HC: Low speed device on port B OK I: MAC address: 10:e2:d5:00:00:5b I: Press Q or ESC to abort boot USB: HC: VID: 0E6A, PID: 6001 USB: HC: VID: 093A, PID: 2510 USB: HC: Found keyboard USB: HC: Found mouse I: Booting from filesystem... E: Unable to initialize memory card driver E: Unable to initialize filesystem I: Booting from flash... I: Loading 1889692 bytes from flash... I: Booting... RTEMS SHELL (Ver.1.0-FRC):/dev/console. Jun 4 2011. 'help' to list commands. [/] # memcard_disk_init: Error: SC = 27: Initialize memory card memcard_register: Error: SC = 27: Register disk memory card driver BOOTP timeout for server 255.255.255.255 BOOTP call failed -- Connection timed out syslog: ftpd:D eFvTiPc ed:a e/mdoenv /spttayr0t.e.d/ d(e3v /spetsys4i o(n5s) pmsaexu)d o -terminals registered. telnetd started with stacksize = 81920 and priority = 9 wwwff libHPDMC SDRAM initialization runtime (c) Copyright 2010 Sebastien Bourdeauducq, released under GNU LGPL version 3. Version 1.0 Initialization sequence completed. Autocalibration OK, testing memory... All SDRAM initialization completed, boot continuing. VGA: framebuffers at 0x440215c0 0x441a15c0 0x443215c0 VGA: DDC I2C bus initialized VGA: mode set to 640x480 MILKYMIST(tm) v1.0 BIOS http://www.milkymist.org (c) Copyright 2007, 2008, 2009, 2010, 2011 Sebastien Bourdeauducq This program is free software: you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation, version 3 of the License. I: BIOS CRC passed (86e23684) BRD: SoC 1.0 on Milkymist One (PCB revision 2) BRD: Mem. card : Yes BRD: AC'97 : Yes BRD: PFPU : Yes BRD: TMU : Yes BRD: Ethernet : Yes BRD: FML meter : Yes BRD: Video in : Yes BRD: MIDI : Yes BRD: DMX : Yes BRD: IR : Yes BRD: USB : Yes BRD: Memtester : No TMU: texture mapping unit initialized USB: loading Navre firmware USB: starting host controller USB: HC: softusb-input v1.0 UKB: USB keyboard connected to console I: Displaying splash screen...USB: HC: Low speed device on port A USB: HC: Low speed device on port B OK I: MAC address: 10:e2:d5:00:00:5b I: Press Q or ESC to abort boot USB: HC: VID: 0E6A, PID: 6001 USB: HC: VID: 093A, PID: 2510 USB: HC: Found keyboard USB: HC: Found mouse I: Booting from filesystem... E: Unable to initialize memory card driver E: Unable to initialize filesystem I: Booting from flash... I: Loading 1889692 bytes from flash... I: Booting... RTEMS SHELL (Ver.1.0-FRC):/dev/console. Jun 4 2011. 'help' to list commands. [/] # memcard_disk_init: Error: SC = 27: Initialize memory card memcard_register: Error: SC = 27: Register disk memory card driver BOOTP timeout for server 255.255.255.255 BOOTP call failed -- Connection timed out syslog: ftpd:D eFvTiPc ed:a e/mdoenv /spttayr0t.e.d/ d(e3v /spetsys4i o(n5s) pmsaexu)d o -terminals registered. telnetd started with stacksize = 81920 and priority = 9 wwfff libHPDMC SDRAM initialization runtime (c) Copyright 2010 Sebastien Bourdeauducq, released under GNU LGPL version 3. Version 1.0 Initialization sequence completed. Autocalibration OK, testing memory... All SDRAM initialization completed, boot continuing. VGA: framebuffers at 0x440215c0 0x441a15c0 0x443215c0 VGA: DDC I2C bus initialized VGA: mode set to 640x480 MILKYMIST(tm) v1.0 BIOS http://www.milkymist.org (c) Copyright 2007, 2008, 2009, 2010, 2011 Sebastien Bourdeauducq This program is free software: you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation, version 3 of the License. I: BIOS CRC passed (86e23684) BRD: SoC 1.0 on Milkymist One (PCB revision 2) BRD: Mem. card : Yes BRD: AC'97 : Yes BRD: PFPU : Yes BRD: TMU : Yes BRD: Ethernet : Yes BRD: FML meter : Yes BRD: Video in : Yes BRD: MIDI : Yes BRD: DMX : Yes BRD: IR : Yes BRD: USB : Yes BRD: Memtester : No TMU: texture mapping unit initialized USB: loading Navre firmware USB: starting host controller USB: HC: softusb-input v1.0 UKB: USB keyboard connected to console I: Displaying splash screen...USB: HC: Low speed device on port A USB: HC: Low speed device on port B OK I: MAC address: 10:e2:d5:00:00:5b I: Press Q or ESC to abort boot USB: HC: VID: 0E6A, PID: 6001 USB: HC: VID: 093A, PID: 2510 USB: HC: Found keyboard USB: HC: Found mouse I: Booting from filesystem... E: Unable to initialize memory card driver E: Unable to initialize filesystem I: Booting from flash... I: Loading 1889692 bytes from flash... I: Booting... RTEMS SHELL (Ver.1.0-FRC):/dev/console. Jun 4 2011. 'help' to list commands. [/] # memcard_disk_init: Error: SC = 27: Initialize memory card memcard_register: Error: SC = 27: Register disk memory card driver BOOTP timeout for server 255.255.255.255 BOOTP call failed -- Connection timed out syslog: ftpd:D eFvTiPc ed:a e/mdoenv /spttayr0t.e.d/ d(e3v /spetsys4i o(n5s) pmsaexu)d o -terminals registered. telnetd started with stacksize = 81920 and priority = 9 www&f‘ libHPDMC SDRAM initialization runtime (c) Copyright 2010 Sebastien Bourdeauducq, released under GNU LGPL version 3. Version 1.0 Initialization sequence completed. Autocalibration OK, testing memory... All SDRAM initialization completed, boot continuing. VGA: framebuffers at 0x440215c0 0x441a15c0 0x443215c0 VGA: DDC I2C bus initialized VGA: mode set to 640x480 MILKYMIST(tm) v1.0 BIOS http://www.milkymist.org (c) Copyright 2007, 2008, 2009, 2010, 2011 Sebastien Bourdeauducq This program is free software: you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation, version 3 of the License. I: BIOS CRC passed (86e23684) BRD: SoC 1.0 on Milkymist One (PCB revision 2) BRD: Mem. card : Yes BRD: AC'97 : Yes BRD: PFPU : Yes BRD: TMU : Yes BRD: Ethernet : Yes BRD: FML meter : Yes BRD: Video in : Yes BRD: MIDI : Yes BRD: DMX : Yes BRD: IR : Yes BRD: USB : Yes BRD: Memtester : No TMU: texture mapping unit initialized USB: loading Navre firmware USB: starting host controller USB: HC: softusb-input v1.0 UKB: USB keyboard connected to console I: Displaying splash screen...USB: HC: Low speed device on port A USB: HC: Low speed device on port B OK I: MAC address: 10:e2:d5:00:00:5b I: Press Q or ESC to abort boot USB: HC: VID: 0E6A, PID: 6001 USB: HC: VID: 093A, PID: 2510 USB: HC: Found keyboard USB: HC: Found mouse I: Booting from filesystem... E: Unable to initialize memory card driver E: Unable to initialize filesystem I: Booting from flash... I: Loading 1889692 bytes from flash... I: Booting... RTEMS SHELL (Ver.1.0-FRC):/dev/console. Jun 4 2011. 'help' to list commands. [/] # memcard_disk_init: Error: SC = 27: Initialize memory card memcard_register: Error: SC = 27: Register disk memory card driver BOOTP timeout for server 255.255.255.255 BOOTP call failed -- Connection timed out syslog: ftpd:D eFvTiPc ed:a e/mdoenv /spttayr0t.e.d/ d(e3v /spetsys4i o(n5s) pmsaexu)d o -terminals registered. telnetd started with stacksize = 81920 and priority = 9 www&fD libHPDMC SDRAM initialization runtime (c) Copyright 2010 Sebastien Bourdeauducq, released under GNU LGPL version 3. Version 1.0 Initialization sequence completed. Autocalibration OK, testing memory... All SDRAM initialization completed, boot continuing. VGA: framebuffers at 0x440215c0 0x441a15c0 0x443215c0 VGA: DDC I2C bus initialized VGA: mode set to 640x480 MILKYMIST(tm) v1.0 BIOS http://www.milkymist.org (c) Copyright 2007, 2008, 2009, 2010, 2011 Sebastien Bourdeauducq This program is free software: you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation, version 3 of the License. I: BIOS CRC passed (86e23684) BRD: SoC 1.0 on Milkymist One (PCB revision 2) BRD: Mem. card : Yes BRD: AC'97 : Yes BRD: PFPU : Yes BRD: TMU : Yes BRD: Ethernet : Yes BRD: FML meter : Yes BRD: Video in : Yes BRD: MIDI : Yes BRD: DMX : Yes BRD: IR : Yes BRD: USB : Yes BRD: Memtester : No TMU: texture mapping unit initialized USB: loading Navre firmware USB: starting host controller USB: HC: softusb-input v1.0 UKB: USB keyboard connected to console I: Displaying splash screen...USB: HC: Low speed device on port A USB: HC: Low speed device on port B OK I: MAC address: 10:e2:d5:00:00:5b I: Press Q or ESC to abort boot USB: HC: VID: 0E6A, PID: 6001 USB: HC: VID: 093A, PID: 2510 USB: HC: Found keyboard USB: HC: Found mouse I: Booting from filesystem... E: Unable to initialize memory card driver E: Unable to initialize filesystem I: Booting from flash... I: Loading 1889692 bytes from flash... I: Booting... RTEMS SHELL (Ver.1.0-FRC):/dev/console. Jun 4 2011. 'help' to list commands. [/] # memcard_disk_init: Error: SC = 27: Initialize memory card memcard_register: Error: SC = 27: Register disk memory card driver BOOTP timeout for server 255.255.255.255 BOOTP call failed -- Connection timed out syslog: ftpd:D eFvTiPc ed:a e/mdoenv /spttayr0t.e.d/ d(e3v /spetsys4i o(n5s) pmsaexu)d o -terminals registered. telnetd started with stacksize = 81920 and priority = 9 wwwff‘ libHPDMC SDRAM initialization runtime (c) Copyright 2010 Sebastien Bourdeauducq, released under GNU LGPL version 3. Version 1.0 Initialization sequence completed. Autocalibration OK, testing memory... All SDRAM initialization completed, boot continuing. VGA: framebuffers at 0x440215c0 0x441a15c0 0x443215c0 VGA: DDC I2C bus initialized VGA: mode set to 640x480 MILKYMIST(tm) v1.0 BIOS http://www.milkymist.org (c) Copyright 2007, 2008, 2009, 2010, 2011 Sebastien Bourdeauducq This program is free software: you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation, version 3 of the License. I: BIOS CRC passed (86e23684) BRD: SoC 1.0 on Milkymist One (PCB revision 2) BRD: Mem. card : Yes BRD: AC'97 : Yes BRD: PFPU : Yes BRD: TMU : Yes BRD: Ethernet : Yes BRD: FML meter : Yes BRD: Video in : Yes BRD: MIDI : Yes BRD: DMX : Yes BRD: IR : Yes BRD: USB : Yes BRD: Memtester : No TMU: texture mapping unit initialized USB: loading Navre firmware USB: starting host controller USB: HC: softusb-input v1.0 UKB: USB keyboard connected to console I: Displaying splash screen...USB: HC: Low speed device on port A USB: HC: Low speed device on port B OK I: MAC address: 10:e2:d5:00:00:5b I: Press Q or ESC to abort boot USB: HC: VID: 0E6A, PID: 6001 USB: HC: VID: 093A, PID: 2510 USB: HC: Found keyboard USB: HC: Found mouse I: Booting from filesystem... E: Unable to initialize memory card driver E: Unable to initialize filesystem I: Booting from flash... I: Loading 1889692 bytes from flash... I: Booting... RTEMS SHELL (Ver.1.0-FRC):/dev/console. Jun 4 2011. 'help' to list commands. [/] # memcard_disk_init: Error: SC = 27: Initialize memory card memcard_register: Error: SC = 27: Register disk memory card driver BOOTP timeout for server 255.255.255.255 BOOTP call failed -- Connection timed out syslog: ftpd:D eFvTiPc ed:a e/mdoenv /spttayr0t.e.d/ d(e3v /spetsys4i o(n5s) pmsaexu)d o -terminals registered. telnetd started with stacksize = 81920 and priority = 9 ww7ffD libHPDMC SDRAM initialization runtime (c) Copyright 2010 Sebastien Bourdeauducq, released under GNU LGPL version 3. Version 1.0 Initialization sequence completed. Autocalibration OK, testing memory... All SDRAM initialization completed, boot continuing. VGA: framebuffers at 0x440215c0 0x441a15c0 0x443215c0 VGA: DDC I2C bus initialized VGA: mode set to 640x480 MILKYMIST(tm) v1.0 BIOS http://www.milkymist.org (c) Copyright 2007, 2008, 2009, 2010, 2011 Sebastien Bourdeauducq This program is free software: you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation, version 3 of the License. I: BIOS CRC passed (86e23684) BRD: SoC 1.0 on Milkymist One (PCB revision 2) BRD: Mem. card : Yes BRD: AC'97 : Yes BRD: PFPU : Yes BRD: TMU : Yes BRD: Ethernet : Yes BRD: FML meter : Yes BRD: Video in : Yes BRD: MIDI : Yes BRD: DMX : Yes BRD: IR : Yes BRD: USB : Yes BRD: Memtester : No TMU: texture mapping unit initialized USB: loading Navre firmware USB: starting host controller USB: HC: softusb-input v1.0 UKB: USB keyboard connected to console I: Displaying splash screen...USB: HC: Low speed device on port A USB: HC: Low speed device on port B OK I: MAC address: 10:e2:d5:00:00:5b I: Press Q or ESC to abort boot USB: HC: VID: 0E6A, PID: 6001 USB: HC: VID: 093A, PID: 2510 USB: HC: Found keyboard USB: HC: Found mouse I: Booting from filesystem... E: Unable to initialize memory card driver E: Unable to initialize filesystem I: Booting from flash... I: Loading 1889692 bytes from flash... I: Booting... RTEMS SHELL (Ver.1.0-FRC):/dev/console. Jun 4 2011. 'help' to list commands. [/] # memcard_disk_init: Error: SC = 27: Initialize memory card memcard_register: Error: SC = 27: Register disk memory card driver BOOTP timeout for server 255.255.255.255 BOOTP call failed -- Connection timed out syslog: ftpd:D eFvTiPc ed:a e/mdoenv /spttayr0t.e.d/ d(e3v /spetsys4i o(n5s) pmsaexu)d o -terminals registered. telnetd started with stacksize = 81920 and priority = 9 ww7ff libHPDMC SDRAM initialization runtime (c) Copyright 2010 Sebastien Bourdeauducq, released under GNU LGPL version 3. Version 1.0 Initialization sequence completed. Autocalibration OK, testing memory... All SDRAM initialization completed, boot continuing. VGA: framebuffers at 0x440215c0 0x441a15c0 0x443215c0 VGA: DDC I2C bus initialized VGA: mode set to 640x480 MILKYMIST(tm) v1.0 BIOS http://www.milkymist.org (c) Copyright 2007, 2008, 2009, 2010, 2011 Sebastien Bourdeauducq This program is free software: you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation, version 3 of the License. I: BIOS CRC passed (86e23684) BRD: SoC 1.0 on Milkymist One (PCB revision 2) BRD: Mem. card : Yes BRD: AC'97 : Yes BRD: PFPU : Yes BRD: TMU : Yes BRD: Ethernet : Yes BRD: FML meter : Yes BRD: Video in : Yes BRD: MIDI : Yes BRD: DMX : Yes BRD: IR : Yes BRD: USB : Yes BRD: Memtester : No TMU: texture mapping unit initialized USB: loading Navre firmware USB: starting host controller USB: HC: softusb-input v1.0 UKB: USB keyboard connected to console I: Displaying splash screen...USB: HC: Low speed device on port A USB: HC: Low speed device on port B OK I: MAC address: 10:e2:d5:00:00:5b I: Press Q or ESC to abort boot USB: HC: VID: 0E6A, PID: 6001 USB: HC: VID: 093A, PID: 2510 USB: HC: Found keyboard USB: HC: Found mouse I: Booting from filesystem... E: Unable to initialize memory card driver E: Unable to initialize filesystem I: Booting from flash... I: Loading 1889692 bytes from flash... I: Booting... RTEMS SHELL (Ver.1.0-FRC):/dev/console. Jun 4 2011. 'help' to list commands. [/] # memcard_disk_init: Error: SC = 27: Initialize memory card memcard_register: Error: SC = 27: Register disk memory card driver BOOTP timeout for server 255.255.255.255 BOOTP call failed -- Connection timed out syslog: ftpd:D eFvTiPc ed:a e/mdoenv /spttayr0t.e.d/ d(e3v /spetsys4i o(n5s) pmsaexu)d o -terminals registered. telnetd started with stacksize = 81920 and priority = 9 wwv&f libHPDMC SDRAM initialization runtime (c) Copyright 2010 Sebastien Bourdeauducq, released under GNU LGPL version 3. Version 1.0 Initialization sequence completed. Autocalibration OK, testing memory... All SDRAM initialization completed, boot continuing. VGA: framebuffers at 0x440215c0 0x441a15c0 0x443215c0 VGA: DDC I2C bus initialized VGA: mode set to 640x480 MILKYMIST(tm) v1.0 BIOS http://www.milkymist.org (c) Copyright 2007, 2008, 2009, 2010, 2011 Sebastien Bourdeauducq This program is free software: you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation, version 3 of the License. I: BIOS CRC passed (86e23684) BRD: SoC 1.0 on Milkymist One (PCB revision 2) BRD: Mem. card : Yes BRD: AC'97 : Yes BRD: PFPU : Yes BRD: TMU : Yes BRD: Ethernet : Yes BRD: FML meter : Yes BRD: Video in : Yes BRD: MIDI : Yes BRD: DMX : Yes BRD: IR : Yes BRD: USB : Yes BRD: Memtester : No TMU: texture mapping unit initialized USB: loading Navre firmware USB: starting host controller USB: HC: softusb-input v1.0 UKB: USB keyboard connected to console I: Displaying splash screen...USB: HC: Low speed device on port A USB: HC: Low speed device on port B OK I: MAC address: 10:e2:d5:00:00:5b I: Press Q or ESC to abort boot USB: HC: VID: 0E6A, PID: 6001 USB: HC: VID: 093A, PID: 2510 USB: HC: Found keyboard USB: HC: Found mouse I: Booting from filesystem... E: Unable to initialize memory card driver E: Unable to initialize filesystem I: Booting from flash... I: Loading 1889692 bytes from flash... I: Booting... RTEMS SHELL (Ver.1.0-FRC):/dev/console. Jun 4 2011. 'help' to list commands. [/] # memcard_disk_init: Error: SC = 27: Initialize memory card memcard_register: Error: SC = 27: Register disk memory card driver BOOTP timeout for server 255.255.255.255 BOOTP call failed -- Connection timed out syslog: ftpd:D eFvTiPc ed:a e/mdoenv /spttayr0t.e.d/ d(e3v /spetsys4i o(n5s) pmsaexu)d o -terminals registered. telnetd started with stacksize = 81920 and priority = 9 wwwff‘ libHPDMC SDRAM initialization runtime (c) Copyright 2010 Sebastien Bourdeauducq, released under GNU LGPL version 3. Version 1.0 Initialization sequence completed. Autocalibration OK, testing memory... All SDRAM initialization completed, boot continuing. VGA: framebuffers at 0x440215c0 0x441a15c0 0x443215c0 VGA: DDC I2C bus initialized VGA: mode set to 640x480 MILKYMIST(tm) v1.0 BIOS http://www.milkymist.org (c) Copyright 2007, 2008, 2009, 2010, 2011 Sebastien Bourdeauducq This program is free software: you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation, version 3 of the License. I: BIOS CRC passed (86e23684) BRD: SoC 1.0 on Milkymist One (PCB revision 2) BRD: Mem. card : Yes BRD: AC'97 : Yes BRD: PFPU : Yes BRD: TMU : Yes BRD: Ethernet : Yes BRD: FML meter : Yes BRD: Video in : Yes BRD: MIDI : Yes BRD: DMX : Yes BRD: IR : Yes BRD: USB : Yes BRD: Memtester : No TMU: texture mapping unit initialized USB: loading Navre firmware USB: starting host controller USB: HC: softusb-input v1.0 UKB: USB keyboard connected to console I: Displaying splash screen...USB: HC: Low speed device on port A USB: HC: Low speed device on port B OK I: MAC address: 10:e2:d5:00:00:5b I: Press Q or ESC to abort boot USB: HC: VID: 093A, PID: 2510 USB: HC: VID: 0E6A, PID: 6001 USB: HC: Found mouse USB: HC: Found keyboard I: Aborted boot on user request BIOS> serialboot I: Attempting serial firmware loading sL5DdSMmkekro *** Milkymist One automated tests starting... *** Select a test category below, or hit ENTER to run all tests: a: Images b: SDRAM c: GPIO d: VGA e: Memory card f: Audio g: Ethernet h: Video input i: MIDI j: DMX512 k: Infrared l: USB *** a pressed Images CRC: Checking : standby.fpg CRC passed (got c58e8905) Checking : soc-rescue.fpg CRC passed (got 30dcc535) Checking : bios-rescue.bin(CRC) CRC passed (got efa00d1c) Checking : splash-rescue.raw CRC passed (got e8ff824f) Checking : flickernoise.fbi(rescue)(CRC) CRC passed (got aa12a56a) Checking : soc.fpg CRC passed (got 3a31e737) Checking : bios.bin(CRC) CRC passed (got 86e23684) Checking : splash.raw CRC passed (got 978f860c) Checking : flickernoise.fbi(CRC) CRC passed (got aa12a56a) [  PASSED  ] *** Select a test category below, or hit ENTER to run all tests: a: Images b: SDRAM c: GPIO d: VGA e: Memory card f: Audio g: Ethernet h: Video input i: MIDI j: DMX512 k: Infrared l: USB ------------------------------------------------------------------------------------------------- 1. short L3 2. audio test 3, rendering and CRC test ------------------------------------------------------------------------------------------------- libHPDMC SDRAM initialization runtime (c) Copyright 2010 Sebastien Bourdeauducq, released under GNU LGPL version 3. Version 1.0 Initialization sequence completed. Autocalibration OK, testing memory... All SDRAM initialization completed, boot continuing. VGA: framebuffers at 0x440215c0 0x441a15c0 0x443215c0 VGA: DDC I2C bus initialized VGA: mode set to 640x480 MILKYMIST(tm) v1.0 BIOS http://www.milkymist.org (c) Copyright 2007, 2008, 2009, 2010, 2011 Sebastien Bourdeauducq This program is free software: you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation, version 3 of the License. I: BIOS CRC passed (86e23684) BRD: SoC 1.0 on Milkymist One (PCB revision 2) BRD: Mem. card : Yes BRD: AC'97 : Yes BRD: PFPU : Yes BRD: TMU : Yes BRD: Ethernet : Yes BRD: FML meter : Yes BRD: Video in : Yes BRD: MIDI : Yes BRD: DMX : Yes BRD: IR : Yes BRD: USB : Yes BRD: Memtester : No TMU: texture mapping unit initialized USB: loading Navre firmware USB: starting host controller USB: HC: softusb-input v1.0 UKB: USB keyboard connected to console I: Displaying splash screen...OK I: MAC address: 10:e2:d5:00:00:5b I: Press Q or ESC to abort boot I: Aborted boot on user request BIOS> serialboot I: Attempting serial firmware loading sL5DdSMmkekro *** Milkymist One automated tests starting... *** Select a test category below, or hit ENTER to run all tests: a: Images b: SDRAM c: GPIO d: VGA e: Memory card f: Audio g: Ethernet h: Video input i: MIDI j: DMX512 k: Infrared l: USB *** a pressed Images CRC: Checking : standby.fpg CRC passed (got c58e8905) Checking : soc-rescue.fpg CRC passed (got 30dcc535) Checking : bios-rescue.bin(CRC) CRC passed (got efa00d1c) Checking : splash-rescue.raw CRC passed (got e8ff824f) Checking : flickernoise.fbi(rescue)(CRC) CRC passed (got aa12a56a) Checking : soc.fpg CRC passed (got 3a31e737) Checking : bios.bin(CRC) CRC passed (got 86e23684) Checking : splash.raw CRC passed (got 978f860c) Checking : flickernoise.fbi(CRC) CRC passed (got aa12a56a) [  PASSED  ] *** Select a test category below, or hit ENTER to run all tests: a: Images b: SDRAM c: GPIO d: VGA e: Memory card f: Audio g: Ethernet h: Video input i: MIDI j: DMX512 k: Infrared l: USB *** f pressed Codec probe: [  PASSED  ] Line and headphones outputs: Is the test tone OK? (y/n/s/r) [  PASSED  ] Microphone: Recording...Playing... Is the audio played back? (y/n/s/r) [  PASSED  ] Line input: Recording...Playing... Is the audio played back? (y/n/s/r) [  PASSED  ] *** Select a test category below, or hit ENTER to run all tests: a: Images b: SDRAM c: GPIO d: VGA e: Memory card f: Audio g: Ethernet h: Video input i: MIDI j: DMX512 k: Infrared l: USB w76&& libHPDMC SDRAM initialization runtime (c) Copyright 2010 Sebastien Bourdeauducq, released under GNU LGPL version 3. Version 1.0 Initialization sequence completed. Autocalibration OK, testing memory... All SDRAM initialization completed, boot continuing. VGA: framebuffers at 0x440215c0 0x441a15c0 0x443215c0 VGA: DDC I2C bus initialized VGA: mode set to 640x480 MILKYMIST(tm) v1.0 BIOS http://www.milkymist.org (c) Copyright 2007, 2008, 2009, 2010, 2011 Sebastien Bourdeauducq This program is free software: you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation, version 3 of the License. I: BIOS CRC passed (86e23684) BRD: SoC 1.0 on Milkymist One (PCB revision 2) BRD: Mem. card : Yes BRD: AC'97 : Yes BRD: PFPU : Yes BRD: TMU : Yes BRD: Ethernet : Yes BRD: FML meter : Yes BRD: Video in : Yes BRD: MIDI : Yes BRD: DMX : Yes BRD: IR : Yes BRD: USB : Yes BRD: Memtester : No TMU: texture mapping unit initialized USB: loading Navre firmware USB: starting host controller USB: HC: softusb-input v1.0 UKB: USB keyboard connected to console I: Displaying splash screen...OK I: MAC address: 10:e2:d5:00:00:5b I: Press Q or ESC to abort boot I: Booting from filesystem... E: Unable to initialize memory card driver E: Unable to initialize filesystem I: Booting from flash... I: Loading 1889692 bytes from flash... I: Booting... RTEMS SHELL (Ver.1.0-FRC):/dev/console. Jun 4 2011. 'help' to list commands. [/] # memcard_disk_init: Error: SC = 27: Initialize memory card memcard_register: Error: SC = 27: Register disk memory card driver BOOTP timeout for server 255.255.255.255 BOOTP call failed -- Connection timed out syslog: ftpd:D eFvTiPc ed:a e/mdoenv /spttayr0t.e.d/ d(e3v /spetsys4i o(n5s) pmsaexu)d o -terminals registered. telnetd started with stacksize = 81920 and priority = 9 wwwff libHPDMC SDRAM initialization runtime (c) Copyright 2010 Sebastien Bourdeauducq, released under GNU LGPL version 3. Version 1.0 Initialization sequence completed. Autocalibration OK, testing memory... All SDRAM initialization completed, boot continuing. VGA: framebuffers at 0x440215c0 0x441a15c0 0x443215c0 VGA: DDC I2C bus initialized VGA: mode set to 640x480 MILKYMIST(tm) v1.0 BIOS http://www.milkymist.org (c) Copyright 2007, 2008, 2009, 2010, 2011 Sebastien Bourdeauducq This program is free software: you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation, version 3 of the License. I: BIOS CRC passed (86e23684) BRD: SoC 1.0 on Milkymist One (PCB revision 2) BRD: Mem. card : Yes BRD: AC'97 : Yes BRD: PFPU : Yes BRD: TMU : Yes BRD: Ethernet : Yes BRD: FML meter : Yes BRD: Video in : Yes BRD: MIDI : Yes BRD: DMX : Yes BRD: IR : Yes BRD: USB : Yes BRD: Memtester : No TMU: texture mapping unit initialized USB: loading Navre firmware USB: starting host controller USB: HC: softusb-input v1.0 UKB: USB keyboard connected to console I: Displaying splash screen...OK I: MAC address: 10:e2:d5:00:00:5b I: Press Q or ESC to abort boot I: Booting from filesystem... E: Unable to initialize memory card driver E: Unable to initialize filesystem I: Booting from flash... I: Loading 1889692 bytes from flash... I: Booting... RTEMS SHELL (Ver.1.0-FRC):/dev/console. Jun 4 2011. 'help' to list commands. [/] # memcard_disk_init: Error: SC = 27: Initialize memory card memcard_register: Error: SC = 27: Register disk memory card driver BOOTP timeout for server 255.255.255.255 BOOTP call failed -- Connection timed out syslog: ftpd:D eFvTiPc ed:a e/mdoenv /spttayr0t.e.d/ d(e3v /spetsys4i o(n5s) pmsaexu)d o -terminals registered. telnetd started with stacksize = 81920 and priority = 9 ww7&f libHPDMC SDRAM initialization runtime (c) Copyright 2010 Sebastien Bourdeauducq, released under GNU LGPL version 3. Version 1.0 Initialization sequence completed. Autocalibration OK, testing memory... All SDRAM initialization completed, boot continuing. VGA: framebuffers at 0x440215c0 0x441a15c0 0x443215c0 VGA: DDC I2C bus initialized VGA: mode set to 640x480 MILKYMIST(tm) v1.0 BIOS http://www.milkymist.org (c) Copyright 2007, 2008, 2009, 2010, 2011 Sebastien Bourdeauducq This program is free software: you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation, version 3 of the License. I: BIOS CRC passed (86e23684) BRD: SoC 1.0 on Milkymist One (PCB revision 2) BRD: Mem. card : Yes BRD: AC'97 : Yes BRD: PFPU : Yes BRD: TMU : Yes BRD: Ethernet : Yes BRD: FML meter : Yes BRD: Video in : Yes BRD: MIDI : Yes BRD: DMX : Yes BRD: IR : Yes BRD: USB : Yes BRD: Memtester : No TMU: texture mapping unit initialized USB: loading Navre firmware USB: starting host controller USB: HC: softusb-input v1.0 UKB: USB keyboard connected to console I: Displaying splash screen...OK I: MAC address: 10:e2:d5:00:00:5b I: Press Q or ESC to abort boot I: Booting from filesystem... E: Unable to initialize memory card driver E: Unable to initialize filesystem I: Booting from flash... I: Loading 1889692 bytes from flash... I: Booting... RTEMS SHELL (Ver.1.0-FRC):/dev/console. Jun 4 2011. 'help' to list commands. [/] # memcard_disk_init: Error: SC = 27: Initialize memory card memcard_register: Error: SC = 27: Register disk memory card driver BOOTP timeout for server 255.255.255.255 BOOTP call failed -- Connection timed out syslog: ftpd:D eFvTiPc ed:a e/mdoenv /spttayr0t.e.d/ d(e3v /spetsys4i o(n5s) pmsaexu)d o -terminals registered. telnetd started with stacksize = 81920 and priority = 9 wwffd libHPDMC SDRAM initialization runtime (c) Copyright 2010 Sebastien Bourdeauducq, released under GNU LGPL version 3. Version 1.0 Initialization sequence completed. Autocalibration OK, testing memory... All SDRAM initialization completed, boot continuing. VGA: framebuffers at 0x440215c0 0x441a15c0 0x443215c0 VGA: DDC I2C bus initialized VGA: mode set to 640x480 MILKYMIST(tm) v1.0 BIOS http://www.milkymist.org (c) Copyright 2007, 2008, 2009, 2010, 2011 Sebastien Bourdeauducq This program is free software: you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation, version 3 of the License. I: BIOS CRC passed (86e23684) BRD: SoC 1.0 on Milkymist One (PCB revision 2) BRD: Mem. card : Yes BRD: AC'97 : Yes BRD: PFPU : Yes BRD: TMU : Yes BRD: Ethernet : Yes BRD: FML meter : Yes BRD: Video in : Yes BRD: MIDI : Yes BRD: DMX : Yes BRD: IR : Yes BRD: USB : Yes BRD: Memtester : No TMU: texture mapping unit initialized USB: loading Navre firmware USB: starting host controller USB: HC: softusb-input v1.0 UKB: USB keyboard connected to console I: Displaying splash screen...OK I: MAC address: 10:e2:d5:00:00:5b I: Press Q or ESC to abort boot I: Booting from filesystem... E: Unable to initialize memory card driver E: Unable to initialize filesystem I: Booting from flash... I: Loading 1889692 bytes from flash... I: Booting... RTEMS SHELL (Ver.1.0-FRC):/dev/console. Jun 4 2011. 'help' to list commands. [/] # memcard_disk_init: Error: SC = 27: Initialize memory card memcard_register: Error: SC = 27: Register disk memory card driver BOOTP timeout for server 255.255.255.255 BOOTP call failed -- Connection timed out syslog: ftpd:D eFvTiPc ed:a e/mdoenv /spttayr0t.e.d/ d(e3v /spetsys4i o(n5s) pmsaexu)d o -terminals registered. telnetd started with stacksize = 81920 and priority = 9 w7wff libHPDMC SDRAM initialization runtime (c) Copyright 2010 Sebastien Bourdeauducq, released under GNU LGPL version 3. Version 1.0 Initialization sequence completed. Autocalibration OK, testing memory... All SDRAM initialization completed, boot continuing. VGA: framebuffers at 0x440215c0 0x441a15c0 0x443215c0 VGA: DDC I2C bus initialized VGA: mode set to 640x480 MILKYMIST(tm) v1.0 BIOS http://www.milkymist.org (c) Copyright 2007, 2008, 2009, 2010, 2011 Sebastien Bourdeauducq This program is free software: you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation, version 3 of the License. I: BIOS CRC passed (86e23684) BRD: SoC 1.0 on Milkymist One (PCB revision 2) BRD: Mem. card : Yes BRD: AC'97 : Yes BRD: PFPU : Yes BRD: TMU : Yes BRD: Ethernet : Yes BRD: FML meter : Yes BRD: Video in : Yes BRD: MIDI : Yes BRD: DMX : Yes BRD: IR : Yes BRD: USB : Yes BRD: Memtester : No TMU: texture mapping unit initialized USB: loading Navre firmware USB: starting host controller USB: HC: softusb-input v1.0 UKB: USB keyboard connected to console I: Displaying splash screen...OK I: MAC address: 10:e2:d5:00:00:5b I: Press Q or ESC to abort boot I: Booting from filesystem... E: Unable to initialize memory card driver E: Unable to initialize filesystem I: Booting from flash... I: Loading 1889692 bytes from flash... I: Booting... RTEMS SHELL (Ver.1.0-FRC):/dev/console. Jun 4 2011. 'help' to list commands. [/] # memcard_disk_init: Error: SC = 27: Initialize memory card memcard_register: Error: SC = 27: Register disk memory card driver BOOTP timeout for server 255.255.255.255 BOOTP call failed -- Connection timed out syslog: ftpd:D eFvTiPc ed:a e/mdoenv /spttayr0t.e.d/ d(e3v /spetsys4i o(n5s) pmsaexu)d o -terminals registered. telnetd started with stacksize = 81920 and priority = 9 w77&f libHPDMC SDRAM initialization runtime (c) Copyright 2010 Sebastien Bourdeauducq, released under GNU LGPL version 3. Version 1.0 Initialization sequence completed. Autocalibration OK, testing memory... All SDRAM initialization completed, boot continuing. VGA: framebuffers at 0x440215c0 0x441a15c0 0x443215c0 VGA: DDC I2C bus initialized VGA: mode set to 640x480 MILKYMIST(tm) v1.0 BIOS http://www.milkymist.org (c) Copyright 2007, 2008, 2009, 2010, 2011 Sebastien Bourdeauducq This program is free software: you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation, version 3 of the License. I: BIOS CRC passed (86e23684) BRD: SoC 1.0 on Milkymist One (PCB revision 2) BRD: Mem. card : Yes BRD: AC'97 : Yes BRD: PFPU : Yes BRD: TMU : Yes BRD: Ethernet : Yes BRD: FML meter : Yes BRD: Video in : Yes BRD: MIDI : Yes BRD: DMX : Yes BRD: IR : Yes BRD: USB : Yes BRD: Memtester : No TMU: texture mapping unit initialized USB: loading Navre firmware USB: starting host controller USB: HC: softusb-input v1.0 UKB: USB keyboard connected to console I: Displaying splash screen...OK I: MAC address: 10:e2:d5:00:00:5b I: Press Q or ESC to abort boot I: Booting from filesystem... E: Unable to initialize memory card driver E: Unable to initialize filesystem I: Booting from flash... I: Loading 1889692 bytes from flash... I: Booting... RTEMS SHELL (Ver.1.0-FRC):/dev/console. Jun 4 2011. 'help' to list commands. [/] # memcard_disk_init: Error: SC = 27: Initialize memory card memcard_register: Error: SC = 27: Register disk memory card driver BOOTP timeout for server 255.255.255.255 BOOTP call failed -- Connection timed out syslog: ftpd:D eFvTiPc ed:a e/mdoenv /spttayr0t.e.d/ d(e3v /spetsys4i o(n5s) pmsaexu)d o -terminals registered. telnetd started with stacksize = 81920 and priority = 9 wwvf& libHPDMC SDRAM initialization runtime (c) Copyright 2010 Sebastien Bourdeauducq, released under GNU LGPL version 3. Version 1.0 Initialization sequence completed. Autocalibration OK, testing memory... All SDRAM initialization completed, boot continuing. VGA: framebuffers at 0x440215c0 0x441a15c0 0x443215c0 VGA: DDC I2C bus initialized VGA: mode set to 640x480 MILKYMIST(tm) v1.0 BIOS http://www.milkymist.org (c) Copyright 2007, 2008, 2009, 2010, 2011 Sebastien Bourdeauducq This program is free software: you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation, version 3 of the License. I: BIOS CRC passed (86e23684) BRD: SoC 1.0 on Milkymist One (PCB revision 2) BRD: Mem. card : Yes BRD: AC'97 : Yes BRD: PFPU : Yes BRD: TMU : Yes BRD: Ethernet : Yes BRD: FML meter : Yes BRD: Video in : Yes BRD: MIDI : Yes BRD: DMX : Yes BRD: IR : Yes BRD: USB : Yes BRD: Memtester : No TMU: texture mapping unit initialized USB: loading Navre firmware USB: starting host controller USB: HC: softusb-input v1.0 UKB: USB keyboard connected to console I: Displaying splash screen...OK I: MAC address: 10:e2:d5:00:00:5b I: Press Q or ESC to abort boot I: Booting from filesystem... E: Unable to initialize memory card driver E: Unable to initialize filesystem I: Booting from flash... I: Loading 1889692 bytes from flash... I: Booting... RTEMS SHELL (Ver.1.0-FRC):/dev/console. Jun 4 2011. 'help' to list commands. [/] # memcard_disk_init: Error: SC = 27: Initialize memory card memcard_register: Error: SC = 27: Register disk memory card driver BOOTP timeout for server 255.255.255.255 BOOTP call failed -- Connection timed out syslog: ftpd:D eFvTiPc ed:a e/mdoenv /spttayr0t.e.d/ d(e3v /spetsys4i o(n5s) pmsaexu)d o -terminals registered. telnetd started with stacksize = 81920 and priority = 9 ww7&f libHPDMC SDRAM initialization runtime (c) Copyright 2010 Sebastien Bourdeauducq, released under GNU LGPL version 3. Version 1.0 Initialization sequence completed. Autocalibration OK, testing memory... All SDRAM initialization completed, boot continuing. VGA: framebuffers at 0x440215c0 0x441a15c0 0x443215c0 VGA: DDC I2C bus initialized VGA: mode set to 640x480 MILKYMIST(tm) v1.0 BIOS http://www.milkymist.org (c) Copyright 2007, 2008, 2009, 2010, 2011 Sebastien Bourdeauducq This program is free software: you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation, version 3 of the License. I: BIOS CRC passed (86e23684) BRD: SoC 1.0 on Milkymist One (PCB revision 2) BRD: Mem. card : Yes BRD: AC'97 : Yes BRD: PFPU : Yes BRD: TMU : Yes BRD: Ethernet : Yes BRD: FML meter : Yes BRD: Video in : Yes BRD: MIDI : Yes BRD: DMX : Yes BRD: IR : Yes BRD: USB : Yes BRD: Memtester : No TMU: texture mapping unit initialized USB: loading Navre firmware USB: starting host controller USB: HC: softusb-input v1.0 UKB: USB keyboard connected to console I: Displaying splash screen...OK I: MAC address: 10:e2:d5:00:00:5b I: Press Q or ESC to abort boot I: Booting from filesystem... E: Unable to initialize memory card driver E: Unable to initialize filesystem I: Booting from flash... I: Loading 1889692 bytes from flash... I: Booting... RTEMS SHELL (Ver.1.0-FRC):/dev/console. Jun 4 2011. 'help' to list commands. [/] # memcard_disk_init: Error: SC = 27: Initialize memory card memcard_register: Error: SC = 27: Register disk memory card driver BOOTP timeout for server 255.255.255.255 BOOTP call failed -- Connection timed out syslog: ftpd:D eFvTiPc ed:a e/mdoenv /spttayr0t.e.d/ d(e3v /spetsys4i o(n5s) pmsaexu)d o -terminals registered. telnetd started with stacksize = 81920 and priority = 9 wwwff libHPDMC SDRAM initialization runtime (c) Copyright 2010 Sebastien Bourdeauducq, released under GNU LGPL version 3. Version 1.0 Initialization sequence completed. Autocalibration OK, testing memory... All SDRAM initialization completed, boot continuing. VGA: framebuffers at 0x440215c0 0x441a15c0 0x443215c0 VGA: DDC I2C bus initialized VGA: mode set to 640x480 MILKYMIST(tm) v1.0 BIOS http://www.milkymist.org (c) Copyright 2007, 2008, 2009, 2010, 2011 Sebastien Bourdeauducq This program is free software: you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation, version 3 of the License. I: BIOS CRC passed (86e23684) BRD: SoC 1.0 on Milkymist One (PCB revision 2) BRD: Mem. card : Yes BRD: AC'97 : Yes BRD: PFPU : Yes BRD: TMU : Yes BRD: Ethernet : Yes BRD: FML meter : Yes BRD: Video in : Yes BRD: MIDI : Yes BRD: DMX : Yes BRD: IR : Yes BRD: USB : Yes BRD: Memtester : No TMU: texture mapping unit initialized USB: loading Navre firmware USB: starting host controller USB: HC: softusb-input v1.0 UKB: USB keyboard connected to console I: Displaying splash screen...OK I: MAC address: 10:e2:d5:00:00:5b I: Press Q or ESC to abort boot I: Booting from filesystem... E: Unable to initialize memory card driver E: Unable to initialize filesystem I: Booting from flash... I: Loading 1889692 bytes from flash... I: Booting... RTEMS SHELL (Ver.1.0-FRC):/dev/console. Jun 4 2011. 'help' to list commands. [/] # memcard_disk_init: Error: SC = 27: Initialize memory card memcard_register: Error: SC = 27: Register disk memory card driver BOOTP timeout for server 255.255.255.255 BOOTP call failed -- Connection timed out syslog: ftpd:D eFvTiPc ed:a e/mdoenv /spttayr0t.e.d/ d(e3v /spetsys4i o(n5s) pmsaexu)d o -terminals registered. telnetd started with stacksize = 81920 and priority = 9 ww7&&D libHPDMC SDRAM initialization runtime (c) Copyright 2010 Sebastien Bourdeauducq, released under GNU LGPL version 3. Version 1.0 Initialization sequence completed. Autocalibration OK, testing memory... All SDRAM initialization completed, boot continuing. VGA: framebuffers at 0x440215c0 0x441a15c0 0x443215c0 VGA: DDC I2C bus initialized VGA: mode set to 640x480 MILKYMIST(tm) v1.0 BIOS http://www.milkymist.org (c) Copyright 2007, 2008, 2009, 2010, 2011 Sebastien Bourdeauducq This program is free software: you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation, version 3 of the License. I: BIOS CRC passed (86e23684) BRD: SoC 1.0 on Milkymist One (PCB revision 2) BRD: Mem. card : Yes BRD: AC'97 : Yes BRD: PFPU : Yes BRD: TMU : Yes BRD: Ethernet : Yes BRD: FML meter : Yes BRD: Video in : Yes BRD: MIDI : Yes BRD: DMX : Yes BRD: IR : Yes BRD: USB : Yes BRD: Memtester : No TMU: texture mapping unit initialized USB: loading Navre firmware USB: starting host controller USB: HC: softusb-input v1.0 UKB: USB keyboard connected to console I: Displaying splash screen...OK I: MAC address: 10:e2:d5:00:00:5b I: Press Q or ESC to abort boot I: Booting from filesystem... E: Unable to initialize memory card driver E: Unable to initialize filesystem I: Booting from flash... I: Loading 1889692 bytes from flash... I: Booting... RTEMS SHELL (Ver.1.0-FRC):/dev/console. Jun 4 2011. 'help' to list commands. [/] # memcard_disk_init: Error: SC = 27: Initialize memory card memcard_register: Error: SC = 27: Register disk memory card driver BOOTP timeout for server 255.255.255.255 BOOTP call failed -- Connection timed out syslog: ftpd:D eFvTiPc ed:a e/mdoenv /spttayr0t.e.d/ d(e3v /spetsys4i o(n5s) pmsaexu)d o -terminals registered. telnetd started with stacksize = 81920 and priority = 9 ww7&f libHPDMC SDRAM initialization runtime (c) Copyright 2010 Sebastien Bourdeauducq, released under GNU LGPL version 3. Version 1.0 Initialization sequence completed. Autocalibration OK, testing memory... All SDRAM initialization completed, boot continuing. VGA: framebuffers at 0x440215c0 0x441a15c0 0x443215c0 VGA: DDC I2C bus initialized VGA: mode set to 640x480 MILKYMIST(tm) v1.0 BIOS http://www.milkymist.org (c) Copyright 2007, 2008, 2009, 2010, 2011 Sebastien Bourdeauducq This program is free software: you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation, version 3 of the License. I: BIOS CRC passed (86e23684) BRD: SoC 1.0 on Milkymist One (PCB revision 2) BRD: Mem. card : Yes BRD: AC'97 : Yes BRD: PFPU : Yes BRD: TMU : Yes BRD: Ethernet : Yes BRD: FML meter : Yes BRD: Video in : Yes BRD: MIDI : Yes BRD: DMX : Yes BRD: IR : Yes BRD: USB : Yes BRD: Memtester : No TMU: texture mapping unit initialized USB: loading Navre firmware USB: starting host controller USB: HC: softusb-input v1.0 UKB: USB keyboard connected to console I: Displaying splash screen...OK I: MAC address: 10:e2:d5:00:00:5b I: Press Q or ESC to abort boot I: Aborted boot on user request BIOS> serialboot I: Attempting serial firmware loading sL5DdSMmkekro *** Milkymist One automated tests starting... *** Select a test category below, or hit ENTER to run all tests: a: Images b: SDRAM c: GPIO d: VGA e: Memory card f: Audio g: Ethernet h: Video input i: MIDI j: DMX512 k: Infrared l: USB *** a pressed Images CRC: Checking : standby.fpg CRC passed (got c58e8905) Checking : soc-rescue.fpg CRC passed (got 30dcc535) Checking : bios-rescue.bin(CRC) CRC passed (got efa00d1c) Checking : splash-rescue.raw CRC passed (got e8ff824f) Checking : flickernoise.fbi(rescue)(CRC) CRC passed (got aa12a56a) Checking : soc.fpg CRC passed (got 3a31e737) Checking : bios.bin(CRC) CRC passed (got 86e23684) Checking : splash.raw CRC passed (got 978f860c) Checking : flickernoise.fbi(CRC) CRC passed (got aa12a56a) [  PASSED  ] *** Select a test category below, or hit ENTER to run all tests: a: Images b: SDRAM c: GPIO d: VGA e: Memory card f: Audio g: Ethernet h: Video input i: MIDI j: DMX512 k: Infrared l: USB